ICALEO 2011 Paper #C103 (Novel Diffractive Beam Splitters with Efficiency Above 95% Enable Multiple Beam Parallel Processing with Highest Throughput)
Novel Diffractive Beam Splitters with Efficiency Above 95% Enable Multiple Beam Parallel Processing with Highest Throughput
Authors:
Oliver Homburg, LIMO Lissotschenko Mikrooptik GmbH; Dortmund Germany
Yuri Miklyaev, Limo Lissotschenko Mikrooptik Gmbh; Dortmund Germany
Mikhail Ivanenko, Limo Lissotschenko Mikrooptik Gmbh; Dortmund Germany
Vitalij Lissotschenko, Limo Lissotschenko Mikrooptik Gmbh; Dortmund Germany
Presented at ICALEO 2011
In laser-based micro-machining, like high-speed patterning, perforation or dicing frequently the original laser beam is split into several beamlets to increase the throughput of the laser patterning system. Commonly diffra...$28.00
ICALEO 2011 Paper #M1001 (CO2 Laser Cutting of Flexible Glass Substrates)
CO2 Laser Cutting of Flexible Glass Substrates
Authors:
Xinghua Li, Science and Technology, Corning Incorporated; Corning NY USA
Sean M. Garner, Science and Technology, Corning Incorporated; Corning NY USA
Presented at ICALEO 2011
We investigated the effects of cutting flexible glass substrates approximately 100 µm thick, using a CO2 laser full-body cutting technique. The technique uses a CO2 laser heating and water-jet quenching process to generate a tensile stress, which propagated a full-body crack along the cutting line. We examined the effects of process parameter variations on the cutting speed and glass edge quality. These parameters included laser conditions, water-jet coo...$28.00
ICALEO 2011 Paper #M1003 (Picosecond Laser Machining of Fiber Based Sensing Devices)
Picosecond Laser Machining of Fiber Based Sensing Devices
Authors:
Frank Albri, Heriot-Watt University and Scottish Universities Physics Alliance [SUPA]; Edinburgh Scotland
Jun LI, Heriot-Watt University and Scottish Universities Physics Alliance [SUPA]; Edinburgh Scotland
Robert R. J. Maier, Heriot-Watt University and Scottish Universities Physics Alliance [SUPA]; Edinburgh Scotland
William N. MacPherson, Heriot-Watt University and Scottish Universities Physics Alliance [SUPA]; Edinburgh Scotland
Duncan P. Hand, Heriot-Watt University and Scottish Universities Physics Alliance [SUPA]; Edinburgh Scotland
Presented at ICALEO 2011
The applicatio...$28.00
ICALEO 2011 Paper #M1004 (Waveguides and Markings Inside Transparent Materials by Fs-Laser Radiation)
Waveguides and Markings Inside Transparent Materials by Fs-Laser Radiation
Authors:
Dagmar Schaefer, Chair for Laser Technology LLT, RWTH Aachen University; Aachen Germany
Dennis Beckmann, Chair for Laser Technology LLT, RWTH Aachen University; Aachen Germany
Maren Hoerstmann-Jungemann, Chair for Laser Technology LLT, RWTH Aachen University; Aachen Germany
Ingomar Kelbassa, Chair for Laser Technology LLT, RWTH Aachen University; Aachen Germany
Presented at ICALEO 2011
Femtosecond laser writing is an important technique for the realization of many devices. Waveguides, in-volume markings and micro structured devices are flexibly producible with the direct wr...$28.00
ICALEO 2011 Paper #M1006 (Investigations on Microstructuring of Ferroelectric Materials by Picosecond UV Laser Pulses)
Investigations on Microstructuring of Ferroelectric Materials by Picosecond UV Laser Pulses
Authors:
Mareike Stolze, Photonik-Zentrum Kaiserslautern e.V.; Kaiserslautern Germany
Thomas Herrmann, Photonik-Zentrum Kaiserslautern e.V.; Kaiserslautern Germany
Johannes L'Huillier, Photonik-Zentrum Kaiserslautern e.V.; Kaiserslautern Germany
Presented at ICALEO 2011
In recent years ferroelectric crystals, like lithium niobate (LiNbO3) and lithium tantalate (LiTaO3), attended great interest in the fields of integrated optics, telecommunication and nonlinear optics. Because of their remarkable electro-optical and nonlinear-optical properties waveguide structures attracted grea...$28.00
ICALEO 2011 Paper #M101 (Effects of Peak Power and Multipulsing on Drilling and Marking with Ns Pulses)
Effects of Peak Power and Multipulsing on Drilling and Marking with Ns Pulses
Authors:
Sami Hendow, Multiwave Photonics; San Jose CA USA
Presented at ICALEO 2011
Pulse shape control and multipulsing are emerging as alternative means of enhancing material removal rates and improving the quality of machining operation. Various examples of multipulsing and pulse shape control are presented using a MOPA fiber laser, together with experimental and modeling results for 10 to 200 ns pulses showing peak power and pulse duration affecting ablation depth and HAZ. The laser is configured to produce fast bursts of pulses at tens of MHz, with temporal envelope in the range of 10 to 200 ns. These bursts a...$28.00
ICALEO 2011 Paper #M102 (Micro Processing of Metals using a High Repetition Rate Femtosecond Laser: from Laser Process Parameter Study to Machining Examples)
Micro Processing of Metals using a High Repetition Rate Femtosecond Laser: from Laser Process Parameter Study to Machining Examples
Authors:
J. Schille, University of Applied Sciences Mittweida, University of Manchester; Mittweida Germany
L. Schneider, University of Applied Sciences Mittweida; Mittweida, Germany
U. Loeschner, University of Applied Sciences Mittweida; Mittweida Germany
R. Ebert, University of Applied Sciences Mittweida; Mittweida Germany
P. Scully, University of Applied Sciences Mittweida, University of Manchester; - Great Britain
N. Goddard, University of Manchester; - Great Britain
B. Steiger, University of Applied Sc...$28.00
ICALEO 2011 Paper #M103 (Processing of Industrially Relevant Non Metals with Laser Pulses in the Range Between 10Ps and 50Ps)
Processing of Industrially Relevant Non Metals with Laser Pulses in the Range Between 10Ps and 50Ps
Authors:
Beat Neuenschwander, Bern University of Applied Sciences; Burgdorf Switzerland
Beat Jäeggi, Bern University of Applied Sciences; Burgdorf Switzerland
Marc Schmid, Bern University of Applied Sciences; Burgdorf Switzerland
Urs Lüscher, University of Applied Sciences Northwestern Switzerland; Windisch Switzerland
Carmine Nocera, University of Applied Sciences Northwestern Switzerland; Windisch Switzerland
Presented at ICALEO 2011
The interest in ps-laser pulses for industrial applications has significantly increased in the last few years...$28.00
ICALEO 2011 Paper #M104 (High Power Fiber Laser On-the-Fly Drilling of Thin Materials)
High Power Fiber Laser On-the-Fly Drilling of Thin Materials
Authors:
Henrikki Pantsar, Cencorp Corporation; Mikkeli Finland
Petri Koivunen, Cencorp Corporation; Mikkeli Finland
Ville Lampinen, Cencorp Corporation; Mikkeli Finland
Hannu VäIsänen, Cencorp Corporation; Mikkeli Finland
Mikko Laaksonen, Cencorp Corporation; Mikkeli Finland
Presented at ICALEO 2011
This paper presents fiber laser percussion drilling from a system manufacturer point of view, including industrial and experimental aspects. The industrial part describes requirements and system integration considerations related to the high rate drilling process. The experimental part...$28.00
ICALEO 2011 Paper #M106 (Laser Milling: Tool Making Capabilities)
Laser Milling: Tool Making Capabilities
Authors:
Stefan Dimov, Cardiff University; Cardiff Great Britain
Petko Petkov, Cardiff University; -
Franck Lacan, Cardiff University; -
Steffen Scholz, Cardiff University; -
Presented at ICALEO 2011
Laser milling is a relatively new manufacturing process that has attracted much attention from engineers and researchers for the last decade. The process allows complex parts and tooling inserts to be fabricated directly from 3D CAD data in a wide range of advanced engineering materials such as ceramics, hardened steel, bulk metallic glasses, titanium and nickel alloys. The paper discusses the process design and imple...$28.00