ICALEO 2005 Paper #902 (Heat Conduction Welding of Thin Films with Elliptical Beam of Direct Diode Laser)
Heat Conduction Welding of Thin Films with Elliptical Beam of Direct Diode Laser
Authors:
Nobuyuki Abe, Osaka University; Ibaraki, Osaka Japan
Masahiro Tsukamoto, Osaka University; Ibaraki Osaka Japan
Takashi Imanaka, Osaka University; Ibaraki Osaka Japan
Yoshinori Funada, Industrial Research Institute of Ishikawa; Kanazawa Ishikawa Japan
Presented at ICALEO 2005
Recently there has been a growing trend toward miniaturization of electronics and mechanical parts to reduce energy consumption and achieve greater compactness. In order to respond to such demands, the development of an advanced welding method is required for welding thin foil 100 microns or les...$28.00
ICALEO 2005 Paper #901 (Development Trends of High Power Diode Lasers and Resulting Perspectives for Applications (Invited Paper))
Development Trends of High Power Diode Lasers and Resulting Perspectives for Applications (Invited Paper)
Authors:
Reinhart Poprawe, Fraunhofer Institute for Laser Technology; Aachen Germany
Christian Wessling, Fraunhofer-Institute fr Laser Technology; Aachen Germany
Peter Loosen, Fraunhofer-Institute fr Laser Technology; Aachen Germany
Presented at ICALEO 2005
High Power Diode Lasers have been used for years in low power density applications. The lack of sufficient beam quality an life times in the range of a few thousand hours limited their applicability severely. However, in the past years the intrinsic beam quality in terms of divergence, smile and stability as w...$28.00
ICALEO 2005 Paper #806 (Study of Polymers Laser Grooving by Using the Analysis of Variance Method)
Study of Polymers Laser Grooving by Using the Analysis of Variance Method
Authors:
Adelina Han, LTm; Chalon Sur Saone France
Alexandru Nichici, University Politechnic of Timisoara; Timisoara Romania
Dominique Grevey, LTm; Le Creusot France
Gianni Pillon, LTm; Chalon Sur Saone France
Presented at ICALEO 2005
Although polymers laser processing is a relative recently technological procedure, the remarkable results obtained are encouraging the continuation of the researches with the purpose of extending its utilization. Laser processing is difficult to control because of the nature and complexity of the phenomena and processes that are developing among the las...$28.00
ICALEO 2005 Paper #805 (A 2-D Thermal Model for Laser Transmission Welding of Thermoplastics)
A 2-D Thermal Model for Laser Transmission Welding of Thermoplastics
Authors:
Gene Zak, Queen's University; Kingston ON Canada
Layla Mayboudi, Queen's University; Kingston ON Canada
Presented at ICALEO 2005
Recent years have seen wider application of laser transmission welding (LTW) as a means for joining plastic components. Advantages of LTW arise from it being a contact-free method for delivering precisely controlled energy to the weld interface. LTW involves a laser beam passing through a laser-transparent component and subsequently being absorbed by the laser-absorbent component near the weld interface. Heat generated at the interface melts a thin layer of plastic in both co...$28.00
ICALEO 2005 Paper #803 (Laser Welding of Polymers - New Innovations for Joining 3D Geometries)
Laser Welding of Polymers - New Innovations for Joining 3D Geometries
Authors:
Saara Kouvo, LUT Laser Processing Laboratory; Lappeenranta Finland
Anssi Jansson, VTT Industrial Systems; Lappeenranta Finland
Antti Salminen, LUT Laser Processing Laboratory; Lappeenranta Finland
Presented at ICALEO 2005
Laser welding is quite well established technology to join plastics. There are several different techniques to join plastics that have been demonstrated recently in different cases. The currently used techniques are contour welding, quasi-simultaneous welding, simultaneous welding and mask welding. Each of these techniques has their pros and cons. The product designers push...$28.00
ICALEO 2005 Paper #802 (Effects of Laser Beam Scattering on Through-Transmission Welding of Polymers)
Effects of Laser Beam Scattering on Through-Transmission Welding of Polymers
Authors:
Jean-Christophe Kneip, LTm Laboratory - Univ. of Burgandy; Chalon sur Saone France
Alexandru Nichici, University Politechnic of Timisoara; Timisoara Romania
Mariana Ilie, LTm - IUT Le Creusot; Chalon sur Saone France
Simone Mattei, LTm; Le Creusot France
Presented at ICALEO 2005
Laser technology development in the field of plastics processing is now rapidly expanding and opens up a wide range of applications in various industrial fields that could not have been conceived of only a few years ago (automotive, plastic objects, packaging, ?). Among these processes, through-tr...$28.00
$28.00
ICALEO 2005 Paper #707 (Finnish Laser Innovation Commercialization Challenge)
Finnish Laser Innovation Commercialization Challenge
Authors:
Petri Rahja, Iprbox Oy; Espoo Finland
Presented at ICALEO 2005
As being one of the most innovative countries in the world, Finland is also producing many inventions on the laser industry arena. The small home economy does not provide good enough business landscape for Finnish laser technology companies to grow. Finding global partners to startup new business is hard. In Finland, many good inventions have been left undone because of lack of global partners and investors. The presentation will introduce model created by iprbox to overcome the current barrier.$28.00
ICALEO 2005 Paper #704 (Is Your Business Missing the Stage?)
Is Your Business Missing the Stage?
Authors:
William Lawson, Lawson, Lawson & Associates; Somerset WI USA
Presented at ICALEO 2005
Is your business in an Early Market, Emerging Market, Mature Market or Declining Market stage? Is your business focusing on the stage you are in or some other stage? What stage is the customer in compared to the average for the market? Selling to the stage the customer is in is key to success.We all know of businessmen successful with one company who start a new company or a new initiative in their existing company and fall flat on their faces. They had assumed all businesses are alike and/or that the new business was in a market at the same stage as the p...
$28.00
$28.00
Pages
There is currently no content classified with this term.