ICALEO 2005 Paper #1806 (Robust Process-Controller for Nd:YAG Laser Welding)
Robust Process-Controller for Nd:YAG Laser Welding
Authors:
Jeroen Olde Benneker, Netherlands Institute of Metals Research; Enschede Overijssel The Netherlands
Menno De Graaf, University of Twente; Enschede Netherlands
Ben Jonker, University of Twente; Enschede Overijssel The Netherlands
Johan Meijer, University of Twente; Enschede Overijssel The Netherlands
Ronald Aarts, University of Twente; Enschede Overijssel The Netherlands
Presented at ICALEO 2005
A robust process-controller was developed which maintains a fully penetrated weld. This feedback-controller is robust for various process disturbances that may occur,
like variations in sheet ...$28.00
ICALEO 2005 Paper #1805 (Vision-Based Dual Feedback Control of Deposition Height for Laser Consolidation)
Vision-Based Dual Feedback Control of Deposition Height for Laser Consolidation
Authors:
Guoshuang Cai, GE Global Research; Shanghai Peoples Republic of China
Bing-Ran Zuo, GE Global Research; Shanghai China
Henry Peng, GE Global Research; Shanghai China
Kevin Harding, GE Global Research; New York NY USA
Magdi Azer, GE Global Research; New York NY US
Robert Tait, GE Global Research; New York NY USA
Presented at ICALEO 2005
Laser consolidation is an effective way for aircraft part manufacturing and repair. The traditional open-loop laser process relies heavily on an operator?s expertise in order to establish a production process. T...$28.00
ICALEO 2005 Paper #1804 (Low Cost Camera Based Sensor System for Advanced Laser Heat Treatment Processes)
Low Cost Camera Based Sensor System for Advanced Laser Heat Treatment Processes
Authors:
Marko Seifert, Fraunhofer IWS; Dresden Saxony Germany
Steffen Bonss, Fraunhofer IWS; Dresden Saxony Germany
Jan Hannweber, Fraunhofer IWS; Dresden Saxony Germany
Udo Karsunke, Fraunhofer IWS; Dresden Saxony Germany
Eckhard Beyer, Fraunhofer IWS; Dresden Saxony Germany
Presented at ICALEO 2005
Industrial laser processes need to be reliable and well controlled. Infrared pyrometers are standard systems for contact-free temperature measuring at laser heat treatment. These systems are hardly to use for precise measurement at processes where large rectangular or...$28.00
ICALEO 2005 Paper #1803 (Laser Shock Peening Plasma Diagnostics Sensors for Real-Time Process Monitoring)
Laser Shock Peening Plasma Diagnostics Sensors for Real-Time Process Monitoring
Authors:
Pamela Benicewicz, GE Global Research; Niskayuna NY USA
John Deaton, GE Global Research; Niskayuna NY USA
Magdi Azer, GE Global Research; Niskayuna NY US
Pingfan Wu, GE Global Research; Niskayuna NY USA
Todd Rockstroh, GE Transportation; Evendale OH US
Presented at ICALEO 2005
We present optical sensors to monitor a laser-shock peening process in real time. The plasma that is generated during the LSP process emits light that can be temporally and spectrally analyzed to identify molecular and elemental constituents present in the material vaporized during ...$28.00
ICALEO 2005 Paper #1802 (Results on Process Control for YAG Steel Welding)
Results on Process Control for YAG Steel Welding
Authors:
Pascal Aubry, CEA Saclay; Gif-sur-Yvette, Cedex France
Mehdi Guiraud, Gip Gerailp; Arcueil France
Presented at ICALEO 2005
This article presents our the results of the part of the European IPCIM Project related to online process controls for steel welding of small to medium thickness. First the overall project is described. Then we present the setup used for the evaluation of the process control during welding. A coaxial camera is used to measure characteristics from the image of the keyhole. A second camera is used to measure characteristics from the image of the melt pool.. From a first set of trials, we evidence the corre...$28.00
ICALEO 2005 Paper #1801 (Experimental Observations of the Laser Keyhole Welding Process of AA5182)
Experimental Observations of the Laser Keyhole Welding Process of AA5182
Authors:
Benno Aalderink, NIMR/University of Twente CTW-WA; Enschede Netherlands
Presented at ICALEO 2005
For the laser keyhole welding process of Aluminium Tailor Welded Blanks, monitoring systems are in many cases vital to ensure a certain weld quality. Especially process visualization with camera based systems gives a lot of insight. Although for steel it has already been demonstrated that real-time images can be obtained from the laser welding process using these cameras based on silicon chips, for Aluminium this turns out to be problematic. The light emitted by the weld plume hides the weld pool from the coaxially mou...$28.00
ICALEO 2005 Paper #1702 (Explaining Microstructural and Physical Variations in Rapid Additive Manufactured Waspaloy Parts Through the Laser-Deposition Thermal Cycle)
Explaining Microstructural and Physical Variations in Rapid Additive Manufactured Waspaloy Parts Through the Laser-Deposition Thermal Cycle
Authors:
Andrew Pinkerton, University of Manchester; Manchester UK
Waheed Syed, University of Manchester; Manchester Great Britain
Lin Li, The University of Manchester; Manchester Great Britain
Mallikarjun Karadge, University of Manchester; Manchester Great Britain
Presented at ICALEO 2005
Laser metal deposition has the potential to increase the material efficiency during the manufacture of superalloy aerospace components and also to reduce the need for welded joints to produce the necessary geometries. However, a poss...$28.00
ICALEO 2005 Paper #1701 (Laser Tool Control Recommendations)
Laser Tool Control Recommendations
Authors:
Klaus Haensel, Hyperbel Laser Technology; Moembris Germany
Manfred Berger, II-VI Deutschland GmbH; Darmstadt Germany
Martin Benzing, II-VI Deutschland GmbH; Darmstadt Germany
Presented at ICALEO 2005
The numbers of sensor elements and detector units will grow. Future laser material processing systems for different applications will be designed for automatic or operation. Most laser beam parameters will be observed and the performing optical components will get an indicator which provides data regarding the life time cycle and / or the current performance.
The constant dialog between the laser tool, the visible or invisible b...$28.00
ICALEO 2005 Paper #1606 (Single-Step Graded Surface Coating Using Combined Wire and Powder Feeding Laser Cladding)
Single-Step Graded Surface Coating Using Combined Wire and Powder Feeding Laser Cladding
Authors:
Waheed Syed, The University of Manchester; Manchester Lancs Great Britain
Andrew Pinkerton, The University of Manchester; Manchester Lancs UK
Zhu Liu, The University of Manchester; Manchester Lancs UK
Lin Li, The University of Manchester; Manchester Lancs UK
Presented at ICALEO 2005
This paper reports a new surface coating technique that employs combined powder and wire feeding laser cladding in a single process to deposit dissimilar materials to form a graded coating. Initial experiments were aimed at demonstrating the feasibility and the material distributi...$28.00
ICALEO 2005 Paper #1604 (Mono- and Multi-Layer Magnesium Alloys Laser (Nd:YAG) Cladding Using Aluminum Based Powders)
Mono- and Multi-Layer Magnesium Alloys Laser (Nd:YAG) Cladding Using Aluminum Based Powders
Authors:
Sorin Ignat, LTm - ENSAM; Cluny France
Dominique Grevey, LTm; Le Creusot France
Pierre Sallamand, LTm; Le Creusot France
Presented at ICALEO 2005
The development of the high purity magnesium alloys (such as WE43) incites the designers to reconsider them, and the car industry appears, these days, the most interested to use this kind of alloy. However, due to their supposed ignitability and tendency to oxidation, magnesium alloys require surface treatments. A series of experiments was carried out in order to improve the corrosion resistance and the hardness of two types o...$28.00
Pages
There is currently no content classified with this term.