ICALEO 2005 Paper #P535 (Expansion of Trinocular CCD-Based Optical Detector to Multi-Track Laser Cladding Real-Time Monitoring)
Expansion of Trinocular CCD-Based Optical Detector to Multi-Track Laser Cladding Real-Time Monitoring
Authors:
Ehsan Toyserkani, University of Waterloo; Waterloo Ontario Canada
Mehrdad Iravani-Tabrizipour, University of Waterloo; Waterloo ON Canada
Amir Khajepour, University of Waterloo; Waterloo ON Canada
Matthew Asselin, University of Waterloo; Waterloo On Canada
Presented at ICALEO 2005
Real-time monitoring of laser cladding for measuring the clad geometry provides essential signals for a closed-loop control system utilized in the process. In addition, the measurement can be used in the analysis of the clad quality and the process. In general, the real-...$28.00
ICALEO 2005 Paper #P534 (Laser Cladding on Cast Iron Substrate)
Laser Cladding on Cast Iron Substrate
Authors:
Janne Nurminen, Ketek; Kokkola Finland
Petri Vuoristo, Tampere University of Technology; Tampere Finland
Presented at ICALEO 2005
Laser cladding has been succesfully utilised on number of base materials. There is, however, very little data and knowledge available for cladding on cast iron substrates. Cast irons are difficult substrate materials for all welding processes due to its brittle microstructure. Laser cladding can solve the cracking problem indused by high heat input of other welding processes. There is still a great tendency for pore formations due to combustion of graphite. This study presentates results of cladding experime...$28.00
ICALEO 2005 Paper #P531 (Silicon Laser Alloying for Metal Dusting Environment)
Silicon Laser Alloying for Metal Dusting Environment
Authors:
Muhammad Ejaz, Corrosion and Protection Centre; Manchester UK
Presented at ICALEO 2005
Metal dusting is catastrophic carburization process, which causes metallic materials to disintegrate into particles of graphite, carbides and metal dust. This type of degradation typically takes place in the temperature range 450-800oC in gaseous atmospheres of high carbon activity. The resistance to metal dusting can be improved by increasing the amount of silicon in a metallic material. The silicon content of an alloy is typically kept below about 2%, because it adversely affects the mechanical properties of the material; however, higher concentr...$28.00
ICALEO 2005 Paper #P530 (Visualization of Interaction Between Laser Beam and YAG-Laser-Induced Plume)
Visualization of Interaction Between Laser Beam and YAG-Laser-Induced Plume
Authors:
Keisuke Kinoshita, JWRI, Osaka University; Ibaraki Osaka Japan
Seiji Katayama, JWRI, Osaka University; Ibaraki Osaka Japan
Shuho Tubota, Mitsubishi Heavy Industries, Ltd.; Takasago Hyogo Japan
Takashi Ishide, Mitsubishi Heavy Industries, Ltd.; Takasago Hyogo Japan
Yousuke Kawahito, JWRI, Osaka University; Ibaraki Osaka Japan
Presented at ICALEO 2005
This study was performed to obtain a fundamental knowledge of interaction between a laser beam and a laser-induced plume during welding with a YAG or a fiber laser. The interaction was evaluated and interpreted by...$28.00
ICALEO 2005 Paper #P528 (The Influence of the Low-Energy, Monochromatic Irradiation in Blue Spectral Range upon Vital Functions of Rabbits Organisms, (Comparative Analysis))
The Influence of the Low-Energy, Monochromatic Irradiation in Blue Spectral Range upon Vital Functions of Rabbits Organisms, (Comparative Analysis)
Authors:
Leonid Linnik, Filatov Institute; Odessa Ukraine
Oleksandr Pekaryk, Technology R&D Company; Kiev Ukraine
Presented at ICALEO 2005
As a result of the STCU project # 2604 implementation, we got results, which describe the impact of low-energy, monochromatic light upon rabbit's organisms. The exposures with wavelengths : 412 nm (blue), 520 nm (green) and 605 nm (orange) were studied. The mean power of applied irradiation was within range from 0.05 to 0.25 mW. The immunological, morphological and biochemical aspects of monochromat...$28.00
ICALEO 2005 Paper #P525 (T-Joint Properties Optimisation in Al-Mg-Si Alloy Laser Welding)
T-Joint Properties Optimisation in Al-Mg-Si Alloy Laser Welding
Authors:
Gerard Duffet, LTm; Chalon Sur Saone France
Dominique Grevey, LTm; Le Creusot France
Eugen Cicala, Polytechnic University of Timisoara; Timisoara Romania
Henri Andrzejewski, LTm; Le Creusot France
Presented at ICALEO 2005
Main focus of development in aircraft materials properties is a reduction of the aircraft life cost of aircraft. One of the means to achieve life cost reduction is to improve mechanical properties of aluminium alloys. New production techniques allow materials properties improvements. T-joint properties optimisation in Al-Mg-Si alloy laser welding is one of these mean...$28.00
ICALEO 2005 Paper #P520 (The Effect of Process Parameters on the Gap Bridging Capability for CO2 Laser-GMA Hybrid Welding)
The Effect of Process Parameters on the Gap Bridging Capability for CO2 Laser-GMA Hybrid Welding
Authors:
Hyunbyung Chae, Korea Institute of Industrial Technology; Incheon Korea
Cheolhee Kim, Korea Institute of Industrial Technology; Incheon Korea
Jeonghan Kim, Korea Institute of Industrial Technology; Incheon Korea
Sehun Rhee, Hanyang University; Seoul Korea
Presented at ICALEO 2005
For laser welding in shipbuilding industry, gap bridging capability is one of the most important characteristics to achieve the high productivity and good weld quality. Recently, laser-GMA hybrid welding process is receiving a spotlight as a distinctive method to overcome the ...$28.00
ICALEO 2005 Paper #P518 (Intensity Modulated Focus: A Virtual 'Tool-Tip' for Femtosecond Laser Direct Writing)
Intensity Modulated Focus: A Virtual 'Tool-Tip' for Femtosecond Laser Direct Writing
Authors:
K.J. Moh, Nanyang Technological University; Singapore
David K.Y. Low, Singapore Institute of Manufacturing Technology (SIMTech); Singapore
Y.Y. Tan, Nanyang Technological University; Singapore
Z.L. Li, Singapore Institute of Manufacturing Technology; Singapore
X.C. Yuan, Nanyang Technological University; Singapore
Presented at ICALEO 2005
Waveguides written in glass by femtosecond lasers using low numerical aperture (N.A.) and long focal length systems generally have an elliptical cross section owing to the elongated focal shape of such syst...$28.00
ICALEO 2005 Paper #P517 (Magnetic Confinement of Plasmas in Laser-Induced Breakdown Spectroscopy for Improved Sensitivity and Accuracy)
Magnetic Confinement of Plasmas in Laser-Induced Breakdown Spectroscopy for Improved Sensitivity and Accuracy
Authors:
T. Gebre, University of Nebraska-Lincoln; Lincoln NE USA
Yongfeng Lu, University of Nebraska-Lincoln; Lincoln NE USA
Y.X. Han, University of Nebraska-Lincoln; Lincoln NE USA
Presented at ICALEO 2005
Laser-induced plasmas were created by irradiating KrF eximer laser pulses on different substrates such as Si, Al, Fe and Co. A transverse magnetic field was applied to confine the plasmas. Plasma life times were measured using a fast phototube and a fast oscilloscope in the presence and absence of a magnetic field. The results indicate that the life times o...$28.00
ICALEO 2005 Paper #P516 (Laser Assisted Turning of Hardened Steel)
Laser Assisted Turning of Hardened Steel
Authors:
Katsuhiko Sakai, Shizuoka University; Hamamatsu Japan
Presented at ICALEO 2005
A new machining method for turning of hardened steel is presented in this paper. It is a hybrid machining of conventional turning and laser heating of the material. As hardened steel is too hard to cut, it is grounded to improve it?s dimensional accuracy, though this process have poor productivity and requires relatively long time. By using laser-heating technology, hardness of steel can be reduced effectively, and thus turning is available for hardened steel instead of grinding. The softened area is limited in front of the cutting tool and then they will be removed, ...$28.00
Pages
There is currently no content classified with this term.