ICALEO 2009 Paper #P122 (CO2 Laser Welding Of AHSS)
CO2 Laser Welding Of AHSS
Authors:
John Pandremenos, Laboratory for Manufacturing Systems & Automation, University of Patras; Patras Greece
Konstantinos Salonitis, Laboratory for Manufacturing Systems & Automation, University of Patras; Patras Greece
George Chryssolouris, Laboratory for Manufacturing Systems & Automation, University of Patras; Patras Greece
Presented at ICALEO 2009
This paper deals with the laser welding of advanced high strength steels (AHSS) which have properties promising for automotive applications. Experimental investigation of the CO2 laser welding of similar and dissimilar grades of AHSS (such as DP-W600 and PM-800) and new sandwich material is...$28.00
ICALEO 2009 Paper #P119 (Femtosecond Laser Written Microstructures in PMMA and PDMS at 800nm for Photonic Applications)
Femtosecond Laser Written Microstructures in PMMA and PDMS at 800nm for Photonic Applications
Authors:
Deepak K.L.N., University of Hyderabad; Hyderabad India
R.S.S. Kumar, School of Physics, University of Hyderabad; Hyderabad India
Narayana Rao Desai, University of Hyderabad; Hyderabad India
Venugopal Rao Soma, University of Hyderabad; Hyderabad India
Presented at ICALEO 2009
Microstructures, including gratings and photonic crystal structures, have been fabricated in bulk PDMS and PMMA using femtosecond pulses. The variation of structure width with different writing conditions (focusing, speed, energy) has been investigated. Physical characterization of...$28.00
ICALEO 2009 Paper #P118 (Microfabrication of Gratings Inside a Transparent Material using Femtosecond Laser Processing with Computer Generated Hologram)
Microfabrication of Gratings Inside a Transparent Material using Femtosecond Laser Processing with Computer Generated Hologram
Authors:
Hayato Kawashima, New Glass Forum; Tsukuba Japan
Masahiro Yamaji, New Glass Forum; Tsukuba Japan
Jun'Ichi Suzuki, New Glass Forum; Tsukuba Japan
Shuhei Tanaka, New Glass Forum; Tsukuba Japan
Presented at ICALEO 2009
We have developed a three-dimensional (3D) multiprocessing method using a Computer Generated Hologram (CGH) that generates a 3D structure inside transparent materials such as silica glass and PMMA. In this paper, we consider grating fabrication using femtosecond laser processing with CGH. Femtosecond laser proc...$28.00
ICALEO 2009 Paper #P116 (High Speed Laser Micro-Texturing of Si Wafer for Improved Light Trapping for Photo-Voltaic Application)
High Speed Laser Micro-Texturing of Si Wafer for Improved Light Trapping for Photo-Voltaic Application
Authors:
Ana Pena, The University of Manchester; Manchester Great Britain
Zengbo Wang, The University of Manchester; Manchester Great Britain
David Whitehead, The University of Manchester; Manchester Great Britain
Lin Li, The University of Manchester; Manchester Great Britain
Presented at ICALEO 2009
The demand for efficient, alternative sources of energy is a growing and crucial issue in todays world. Solar energy offers a vast, inexhaustible, free and clean option for future power needs. Although new technologies emerge every day, silicon-based solar...$28.00
ICALEO 2009 Paper #P114 (Laser Doping for Bandgap Engineering)
Laser Doping for Bandgap Engineering
Authors:
Geunsik Lim, University of Central Florida; Orlando FL USA
Nathaniel R. Quick, Applicote Associates, Llc; Orlando FL USA
Aravinda Kar, University of Central Florida; Orlando FL USA
Presented at ICALEO 2009
Laser doping is used to modify the reflectivity and refractive index of embedded regions in wide bandgap semiconductors for selective detection of gaseous chemical species. Each of the four quadrants of a 1 cm x 1 cm x 300 microns silicon carbide (SiC) sensor are laser doped with a different element; gallium, aluminum, scandium and phosphorus, respectively; to create energy levels that selectively absorb photon emissio...$28.00
ICALEO 2009 Paper #P112 (Interaction Between Laser Beam and Paper Materials)
Interaction Between Laser Beam and Paper Materials
Authors:
Heidi Piili, Lappeenranta University of Technology, Laser Processing Research Group (Laborato; Lappeenranta Finland
Antti Salminen, Lappeenranta University of Technology, Laser Processing Research Group (Laboratory of Welding Technology and Laser Processing), Lappeenranta, Finland; Lappeenranta Finland
Veli Kujanpää, Lappeenranta University of Technology, VTT Industrial Systems; Lappeenranta Finland
Presented at ICALEO 2009
It is commonly known that laser beam is suitable for cutting of paper materials. Even tough laser technology has been applied to paper material cutting since 1970s, there exists quite ...$28.00
ICALEO 2009 Paper #P111 (An Overview of the Conventional Microprocessing and Laser Assisted Techniques for Fabricating Microscale Features)
An Overview of the Conventional Microprocessing and Laser Assisted Techniques for Fabricating Microscale Features
Authors:
Antti Salminen, Lappeenranta University of Technology, Laser Processing Research Group (Laboratory of Welding Technology and Laser Processing), Lappeenranta, Finland; Lappeenranta Finland
Heidi Piili, Lappeenranta University of Technology, Laser Processing Research Group (Laboratory of Welding Technology and Laser Processing), Lappeenranta, Finland; Lappeenranta Finland
Heidi Piili, LUT Laser, Lappeenranta University of Technology; Lappeenranta Finland
Matti Manninen, Lappeenranta University of Technology, Laser Processing Research Group (Laboratory of ...$28.00
ICALEO 2009 Paper #P110 (A Comparison Between Novel Fiber Laser Cutting Methods and Conventional Fiber Laser Fusion Cutting)
A Comparison Between Novel Fiber Laser Cutting Methods and Conventional Fiber Laser Fusion Cutting
Authors:
Arttu Jussila, Lappeenranta university of technology; Lappeenranta Finland
Tuomas Purtonen, Lappeenranta University of Technology; -
Antii Salminen, Lappeenranta University of Technology, Machine Technology Center Turku Ltd; Lappeenranta Finland
Presented at ICALEO 2009
There are a few novel fiber laser cutting methods that have shown excellent test results. The cutting speed and quality with these methods exceeds those of conventional CO2-laser cutting methods. Most of these cutting methods use a single-mode fiber laser as the laser source. This paper compares...$28.00
ICALEO 2009 Paper #P108 (Feasibility of Laser Microcladding to Produce Hard Coatings)
Feasibility of Laser Microcladding to Produce Hard Coatings
Authors:
Fernando Lusquinos, Universidade De Vigo; Vigo Spain
Rafael Comesana, Universidade De Vigo; Vigo Spain
Jesus Del Val, Universidade De Vigo; Vigo Spain
Antonio Riveiro, Universidade De Vigo; Vigo Spain
Felix Quintero, Universidade De Vigo; Vigo Spain
Juan Pou, Universidade De Vigo; Vigo Spain
Presented at ICALEO 2009
In the last decades, the laser cladding technique has been firmly established as a technology to produce a wide range of coatings with different purposes: improve the mechanical properties or provide functional properties like the biocompatibility or ...$28.00
ICALEO 2009 Paper #P107 (30KW Peak Power Flash-Lamp Pumped Novel nd:YAG Solid-State Laser)
30KW Peak Power Flash-Lamp Pumped Novel nd:YAG Solid-State Laser
Authors:
Xuesheng Liu, Institute of Laser Engineering, Beijing University of Technology; Chaoyang District Peoples Republic of China
Sun Yao, Institute of Laser Engineering, Beijing University of Technology; Chaoyang District Peoples Republic of China
Yinghua Cao, Institute of Laser Engineering, Beijing University of Technology; Chaoyang District Peoples Republic of China
Zhiyong Wang, Institute of Laser Engineering, Beijing University of Technology; Chaoyang District Peoples Republic of China
Presented at ICALEO 2009
A high energy high peak power flash-lamp pumped pulsed Nd:YAG solid-state ...$28.00
Pages
There is currently no content classified with this term.