ICALEO 2009 Paper #N301 (Rapid Growth of Carbon Nanotubes using Laser-induced Chemical Vapor Deposition)
Rapid Growth of Carbon Nanotubes using Laser-induced Chemical Vapor Deposition
Authors:
J. B. Park, Gwangju Institute of Science of Technology; Gwangju South Korea
M. S. Jeong, Advanced Photonics Research Institute; Gwangju South Korea
Sungho Jeong, Gwangju Institute of Science of Technology; Gwangju South Korea
Presented at ICALEO 2009
This paper presents the growth of single-walled (SW) and multi-walled (MW) carbon nanotubes (CNTs) by laser-induced chemical vapor deposition (LCVD) on a transparent substrate at room temperature. For the CNT growth, multiple catalyst layers (Ni/Al/Cr or Fe/Al/Cr) are irradiated from the backside through the transparent substrate with a...$28.00
ICALEO 2009 Paper #N207 (Laser-Assisted Synthesis of Epitaxial Graphite and Graphene on Sic Single Crystals (Invited Presentation, 40 minutes))
Laser-Assisted Synthesis of Epitaxial Graphite and Graphene on Sic Single Crystals (Invited Presentation, 40 minutes)
Authors:
Alberto Salleo, Stanford University; Stanford CA USA
Michael Toney, Slac; Menlo Park CA USA
Sangwon Lee, Stanford University; Stanford CA USA
Presented at ICALEO 2009
Much exciting materials physics centered around graphene has been uncovered since the realization that self-standing graphene sheets are stable. The synthesis of graphene however is still problematic.
We present an alternative route to epitaxial graphene (EG) synthesis that promises to be scalable and possibly expanded to SiC-on-Si substrates. We use pulsed excimer laser radiatio...$28.00
ICALEO 2009 Paper #N205 (Sintering of Printed Nanoparticle Structures using Laser Treatment)
Sintering of Printed Nanoparticle Structures using Laser Treatment
Authors:
Petri Laakso, VTT; Lappeenranta Finland
Saara Ruotsalainen, VTT Technical Research Centre of Finland; Lappeenranta Finland
Eerik Halonen, Tampere University of Technology; Tampere Finland
Matti Mantysalo, Tampere University of Technology; Tampere Finland
Antti Kemppainen, VTT Technical Research Centre of Finland; Oulu Finland
Presented at ICALEO 2009
Printed intelligence is a promising new technology to produce low-cost electronics. Nonconductive circuits can be printed using nanoscale metal particle inks. Due to the nanoscale size of the particles, the typical sinteri...$28.00
ICALEO 2009 Paper #N204 (Characterization of Aluminum, Brass and Steel Nanoparticles after Laser Ablation)
Characterization of Aluminum, Brass and Steel Nanoparticles after Laser Ablation
Authors:
Nancy Van Suetendael, Florida Institute of Technology; Melbourne Beach FL USA
Kristie Powell, Florida Institute of Technology; Melbourne FL USA
Susan Earles, Florida Institute of Technology; Melbourne FL USA
Mary Helen Mc Cay, Florida Institute of Technology; Melbourne FL USA
Ivica Kostanic, Florida Institute of Technology; Melbourne FL USA
Presented at ICALEO 2009
Understanding surface properties of materials at the atomic-scale is of fundamental interest in advanced materials processing. An interdepartmental research group at Florida Institute of Techno...$28.00
ICALEO 2009 Paper #N203 (Production and Electrostatic Stabilization of Corundum Nanoparticles During Laser Ablation in Acidic Liquids)
Production and Electrostatic Stabilization of Corundum Nanoparticles During Laser Ablation in Acidic Liquids
Authors:
Ramin Sattari, -; -
Xulia Fidalgo Naveira, -; -
Csaba Laszlo Sajti, -; -
Stephan Barcikowski, Laser Zentrum Hannover e.V.; -
Presented at ICALEO 2009
Laser ablation of target materials directly in a liquid phase is a versatile method allowing the generation of nanoparticle colloids of a great variety of materials. Especially, generation of hard ceramic nanoparticles by the laser ablation method yield significant advantages compared to chemical synthesis or mechanical milling and grinding techniques. The controlled local deposition of pu...$28.00
ICALEO 2009 Paper #N201 (Excimer Laser Annealing of TIO2 Nanoparticles For Dye Sensitized Solar Cells (Invited Presentation, 20 minutes))
Excimer Laser Annealing of TIO2 Nanoparticles For Dye Sensitized Solar Cells (Invited Presentation, 20 minutes)
Authors:
Heng Pan, University of California - Berkeley; Berkeley CA USA
Seung H. Ko, Uc-Berkeley; Berkeley CA USA
Costas Grigoropoulos, Uc-Berkeley; Berkeley CA USA
Presented at ICALEO 2009
Metal oxide nanoparticle have been considered promising for realizing low cost printable high performance electronics. It is shown in this paper the application of laser for annealing ZnO and TiO2 nanoparticle for device fabrication. Solution deposited and laser annealed zinc oxide nanoparticle thin film field effect transistors have been fabricated without using conventio...$28.00
ICALEO 2009 Paper #N105 (Surface Plasmon Polaritons for Micro and Nano-Texturing of Metal Surfaces)
Surface Plasmon Polaritons for Micro and Nano-Texturing of Metal Surfaces
Authors:
Leigh Mellor, The University of Liverpool; Liverpool Great Britain
Stuart Edwardson, The University of Liverpool; Liverpool Great Britain
Walter Perrie, The University of Liverpool; Liverpool Great Britain
Geoff Dearden, The University of Liverpool; Liverpool Great Britain
Ken Watkins, The University of Liverpool; Liverpool Great Britain
Presented at ICALEO 2009
The surfaces of a range of metallic materials have been modified through laser illumination. A high frequency pulsed fibre laser system was applied to the surface with varying parameters such as pulse en...$28.00
ICALEO 2009 Paper #N104 (Electrode Modifications and Characteristics of Femtosecond Laser-Stimulated Electrical Discharges in Nanoscale Gaps)
Electrode Modifications and Characteristics of Femtosecond Laser-Stimulated Electrical Discharges in Nanoscale Gaps
Authors:
Jian Chen, Ohio State University; Columbus OH USA
Lingna He, -; -
Yong Chae Lim, The Ohio State University; Columbus OH USA
Dave Farson, The Ohio State University; Columbus OH USA
Stanislav Rokhlin, Ohio State University; Columbus OH USA
Presented at ICALEO 2009
Femtosecond (FS) laser-stimulated discharges in nanoscale and microscale gaps between etched nanoprobe tip cathodes and gold film anodes were studied by experiments and particle simulation with a goal to develop nanoscale plasma-based thermal materials processes...$28.00
ICALEO 2009 Paper #N103 (High Throughput Laser Assisted Near-field Nanomanufacturing)
High Throughput Laser Assisted Near-field Nanomanufacturing
Authors:
Heng Pan, Uc-Berkeley; Berkeley CA USA
David Hwang, Uc-Berkeley; Berkeley CA USA
Seung H. Ko, Uc-Berkeley; Berkeley CA USA
Costas Grigoropoulos, Uc-Berkeley; Berkeley CA USA
Presented at ICALEO 2009
Near field nanomanufacturing can break the diffraction limitation and generate features at nanoscale. However, current near field nanomanufacturing suffers from the low throughput and hinders its practical applications. In this paper, we are presenting a new approach of adopting a tip array and generate an array of features with nanoscale resolution. The nanodevices fabricated by this techniqu...$28.00
ICALEO 2009 Paper #N101 (Flying Plasmonic Lens at Near Field for High Speed Nano-Lithography (Invited Presentation, 40 minutes))
Flying Plasmonic Lens at Near Field for High Speed Nano-Lithography (Invited Presentation, 40 minutes)
Authors:
Liang Pan, SINAM Center at UC Berkeley; Berkeley CA USA
Peter Park, SINAM Center at UC Berkeley; Berkeley CA USA
Yi Xiong, SINAM Center at UC Berkeley; Berkeley CA USA
Erick Ulin-Avila, SINAM Center at UC Berkeley; Berkeley CA USA
Li Zeng, SINAM Center at UC Berkeley; Berkeley CA USA
Cheng Sun, NSF (NSEC), Department of Mechanical Engineering; - USA
David B. Bogy, SINAM Center at UC Berkeley; Berkeley CA USA
Xiang Zhang, SINAM Center at UC Berkeley; Berkeley CA USA
Presented at ICALEO 2009
The C...$28.00
Pages
There is currently no content classified with this term.