ICALEO 2009 Paper #M904 (Direct Laser Doping for High-Efficiency Solar Cells)
Direct Laser Doping for High-Efficiency Solar Cells
Authors:
Malte Schulz-Ruhtenberg, Fraunhofer Institute for Laser Technology; Aachen Germany
Jose Luis Hernandez, Imec; Leuven Belgium
Victor Parajapati, Imec; Leuven Belgium
Robert Bleidiessel, Solland Solar Cells Bv; Heerlen Netherlands
Carmen Morilla, Bp Solar; Tres Cantos Spain
Yannick Larmande, Cnrs-Lp3; Marseille France
Vanessa Vervisch, Cnrs-Lp3; Marseille France
Thierry Sarnet, Cnrs-Lp3; Marseille France
Alexander Olowinsky, Fraunhofer Institute for Laser Technology; Aachen Germany
Presented at ICALEO 2009
Renewable energies is a prom...$28.00
ICALEO 2009 Paper #M903 (Improved Laser Edge Isolation of Crystalline Silicon Solar Cells using a High Power Picosecond Laser)
Improved Laser Edge Isolation of Crystalline Silicon Solar Cells using a High Power Picosecond Laser
Authors:
Oliver Haupt, Laser Zentrum Hannover e.V.; Hannover Germany
Viktor Schuetz, Laser Zentrum Hannover E.V.; Hannover Germany
Rainer Kling, Laser Zentrum Hannover E.V.; Hannover Germany
Henning Nagel, Schott Solar Ag; Alzenau Germany
Stefan Bagus, Schott Solar Ag; Alzenau Germany
Wilhelm Hefner, Schott Solar Ag; Alzenau Germany
Wilfried Schmidt, Schott Solar Ag; Alzenau Germany
Severin Massa, Trumpf Laser Gmbh & Co.Kg; Schramberg Germany
Uwe Stute, Trumpf Laser Gmbh & Co.Kg; Schramberg Germany$28.00
ICALEO 2009 Paper #M902 (Depth Selective Laser Scribing of Thin Films for Roll-to-Roll Production of Silicon Solar Cells)
Depth Selective Laser Scribing of Thin Films for Roll-to-Roll Production of Silicon Solar Cells
Authors:
Jochen Löffler, Energy Research Center of The Netherlands (ECN); Petten Netherlands
Laurie Wipliez, Energy Research Center of the Netherlands; Petten Netherlands
Martijn De Keijzer, Energy Research Center of the Netherlands; Petten Netherlands
Johan Bosman, Energy Research Center of the Netherlands; Petten Netherlands
Wim Soppe, Energy Research Center of the Netherlands; Petten Netherlands
Presented at ICALEO 2009
Significant cost reductions for thin-film silicon solar cells are expected from a transition to roll-to-roll production. Howeve...$28.00
ICALEO 2009 Paper #M806 (Superstructure Fiber Bragg Grating Sensors with Enhanced Sensitivity using Laser Assisted Direct Writing of On-fiber Thin Films)
Superstructure Fiber Bragg Grating Sensors with Enhanced Sensitivity using Laser Assisted Direct Writing of On-fiber Thin Films
Authors:
Hamidreza Alemohammad, University of Waterloo; Waterloo ON Canada
Ehsan Toyserkani, University of Waterloo; Waterloo ON Canada
Presented at ICALEO 2009
The present paper is concerned with improving the sensing performance of optical fiber Bragg gratings (FBG) through the design and fabrication of periodic metallic thin films around optical fibers for the realization of superstructure FBGs (SFBG). Periodic metallic layers are designed in such way that when the fiber is placed in structural or thermal fields, the index of refraction is selectively m...$28.00
ICALEO 2009 Paper #M805 (Smart Tools with Embedded Optical Fiber Sensors: Laser Based Layered Manufacturing Procedures)
Smart Tools with Embedded Optical Fiber Sensors: Laser Based Layered Manufacturing Procedures
Authors:
Hamidreza Alemohammad, University of Waterloo; Waterloo ON Canada
Ehsan Toyserkani, University of Waterloo; Waterloo ON Canada
Presented at ICALEO 2009
This paper presents a new method for the fabrication of smart cutting tools with embedded optical Fiber Bragg Grating (FBG) sensors. In-situ measurement of loads using smart tools during the machining process improves the productivity and precision and reduces the production time. In this regard, fiber gratings embedded in the macro-scale metallic structures of smart tools can increase the performance and efficiency of the tools. H...$28.00
ICALEO 2009 Paper #M804 (Laser Micro Fabrication: Material Removing or Adding)
Laser Micro Fabrication: Material Removing or Adding
Authors:
Jimin Chen, Beijing University of Technology; Chaoyang, Beijing Peoples Republic of China
Shibing Liu, Institute of Laser Eng.; Beijing Peoples Republic of China
Liu Furong, Institute of Laser Engineering, Beijing University of Technology; -
Jun Shao, Institute of Laser Engineering; Beijing Peoples Republic of China
Presented at ICALEO 2009
Laser microfabrication has found wide application in industry. Currently many micro processing technologies have been developed. Laser ablation for example is based on the top-down philosophy which the material is gradually removed. UV lasers or ultrafast la...$28.00
ICALEO 2009 Paper #M803 (Investigations on the Macrostructure and Thermal Process in Laser Vaporizing and Sintering Fabrication)
Investigations on the Macrostructure and Thermal Process in Laser Vaporizing and Sintering Fabrication
Authors:
Pengfei Lv, National Center of Laser Technology, Beijing University of Technology; Beijing Peoples Republic of China
Jimin Chen, National Center of Laser Technology, Beijing University of Technology; Beijing Peoples Republic of China
Furong Liu, National Center of Laser Technology, Beijing University of Technology; Beijing Peoples Republic of China
Presented at ICALEO 2009
The removing and adding materials using laser beam have been both applied widely in manufacture of micro parts. But less attention has been focused on the fabricating technology combining r...$28.00
ICALEO 2009 Paper #M802 (Laser Micro Sintering - Upgrade Technology)
Laser Micro Sintering - Upgrade Technology
Authors:
André Streek, University of applied science Mittweida; Mittweida Germany
Peter Regenfuss, University of Applied Science Mittweida; Mittweida Germany
Robby Ebert, University of Applied Science Mittweida; Mittweida Germany
Horst Exner, University of Applied Science Mittweida; Mittweida Germany
Presented at ICALEO 2009
Laser micro sintering is a technology that has proved suitable for the generative production of bodies with structural resolutions down to 25µm. It is a modification of selective laser sintering, a freeform technology for the generation of three-dimensional parts by repeatedly coating thin p...$28.00
ICALEO 2009 Paper #M801 (Additive Laser Manufacturing of Small Metallic Components by Laser Micro-Cladding)
Additive Laser Manufacturing of Small Metallic Components by Laser Micro-Cladding
Authors:
S. Sankare, Irepa Laser; Illkirch France
Didier Boisselier, Irepa Laser; Illkirch France
Th. Engel, Laboratorie des Systemes Photoniques; Strasbourg France
F. Hlawka, LGECO-GLISS; Strasbourg France
Presented at ICALEO 2009
Thanks to its long experience in the field of laser processing, IREPA LASER has developed tools adapted to the rapid manufacturing of small metallic parts based on its patent on a coaxial powder cladding nozzle. The process consists in the deposition of melted powders in a melt pool in order to build 3D part or to cover small surfaces with metallic...$28.00
ICALEO 2009 Paper #M706 (Analysis and Application of Micro Shockwave Adjustment using Ultrashort Laser Pulses)
Analysis and Application of Micro Shockwave Adjustment using Ultrashort Laser Pulses
Authors:
Peter Bechtold, Chair of Photonic Technologies; USA
Stephan Roth, Bayerisches Laserzentrum GmbH; Erlangen Germany
Michael Schmidt, Friedrich-Alexander-University, Bayerisches Laserzentrum GmbH; Erlangen Germany
Presented at ICALEO 2009
Micro shockwave adjustment is a process mechanism which can be used for highly precise actuator adjustment with bending angle accuracies exceeding 100 nrad in any material. The specific interaction between focussed ultrashort laser pulse and irradiated material allows inducing this process mechanism by ablation with high pulse energy. Within th...$28.00
Pages
There is currently no content classified with this term.