Exciting News—A New LIA Website Is Coming Soon!

Get ready for a fresh design, enhanced usability, and improved accessibility. Click here for a sneak peek!

  • ICALEO 2009 Paper #503 (Investigations on Interface Debonding of the Particle Reinforced Metal Matrix Composites in Laser Forming)

    Investigations on Interface Debonding of the Particle Reinforced Metal Matrix Composites in Laser Forming
    Authors:
    Furong Liu, Beijing University of Technology; Beijing Peoples Republic of China
    K.C. Chan, The Hong Kong Polytechnic University; Hong Kong Hong Kong
    C.Y. Tang, The Hong Kong Polytechni University; Hong Kong Hong Kong
    J.M. Chen, Beijing University of Technology; Beijing Peoples Republic of China
    Presented at ICALEO 2009

    Laser forming is a promising technology to deform the work pieces by thermal stress caused by laser irradiations. Up to date, considerable investigations have been carried out to clarify the process, however, much attention has ...

    $28.00

  • ICALEO 2009 Paper #502 (Laser Beam Hardening - Energy Efficient Heat Treatment?)

    Laser Beam Hardening - Energy Efficient Heat Treatment?
    Authors:
    Steffen Bonss, Fraunhofer IWS; Dresden Germany
    Marko Seifert, Fraunhofer IWS; Dresden Germany
    Berndt Brenner, Fraunhofer Iws; Dresden Germany
    Eckhard Beyer, Fraunhofer Iws; Dresden Germany
    Presented at ICALEO 2009

    Laser beam hardening has been established during the last years as a complementary technology for local heat treatment tasks at tool manufacturing and automotive industry. Especially new high power diode lasers and a lot of process supporting systems, what have been developed in recent years, are responsible for the increase of industrial laser hardening applications. In the context...

    $28.00

  • ICALEO 2009 Paper #409 (Application of Pressure-Sensitive Adhesive Systems in Laser-Beam Welding of Lap Joints)

    Application of Pressure-Sensitive Adhesive Systems in Laser-Beam Welding of Lap Joints
    Authors:
    Uwe Reisgen, Rwth Aachen University, Isf; Aachen Germany
    Klaus Dilger, IFS, TU Braunschweig; - Germany
    Simon Olschok, Rwth Aachen University, Isf; Aachen Germany
    Nikolaus Wagner, Rwth Aachen University, Isf; Aachen Germany
    Presented at ICALEO 2009

    This paper deals with a novel hybrid technology which has been developed by the institutes ISF, Aachen and IFS, Braunschweig. Using this method, the joining partners have been preassembled by means of pressure sensitive adhesive and subsequently laser-beam welded on lap joint. This innovative technology promises a redu...

    $28.00

  • ICALEO 2009 Paper #408 (Laser Direct Joining of Ceramic and Engineering Plastic)

    Laser Direct Joining of Ceramic and Engineering Plastic
    Authors:
    Yousuke Kawahito, Jwri,Osaka University; Ibaraki Japan
    Yusuke Niwa, Jwri, Osaka University; Ibaraki, Osaka Japan
    Seiji Katayama, Jwri, Osaka University; Ibaraki, Osaka Japan
    Presented at ICALEO 2009

    Several materials such as metals, plastics and ceramics have been widely used in industrial applications of automobiles, aircrafts and electronic devices. Joining of these dissimilar materials is necessary and important from a manufacturing viewpoint. The joining is generally performed using adhesive bonds (glues) or mechanical tools such as bolts and rivets. However, these joining processes have some probl...

    $28.00

  • ICALEO 2009 Paper #407 (Laser Welding of Lap Joint Between Copper and Brass)

    Laser Welding of Lap Joint Between Copper and Brass
    Authors:
    Peng Dong, Beijing University of Technology; Beijing Peoples Republic of China
    Rongshi Xiao, Beijing University of Technology; Beijing Peoples Republic of China
    Presented at ICALEO 2009

    Copper and its alloys are widely applied in electronics industry, automotive industry refrigeration and air-conditioning industry et al., because of their excellent thermal conductivity. Traditionally, brazing and soldering are used to join them. However, those methods may bring some problems such as low efficiency and pollution. In this paper, a CW Nd:YAG laser with a output power of 2kW was used to weld lap joint between brass and copper...

    $28.00

  • ICALEO 2009 Paper #406 (Study on the Activating Flux Laser Welding of Titanium Alloy)

    Study on the Activating Flux Laser Welding of Titanium Alloy
    Authors:
    Chen li, BAMTRI; Beijing Peoples Republic of China
    Gong Shuili, BAMTRI; - Peoples Republic of China
    Duan Aiqin, BAMTRI; - Peoples Republic of China
    Presented at ICALEO 2009

    The CO2 laser welding was conducted to investigate the effect of activating flux on laser welding of TA15 titanium alloy with 2.5mm thickness in this paper, which originally developed to improve the penetration depth and reduce the weld porosity for TIG welding of titanium alloy. Results show that the activating flux can eliminate weld undercut defect, and increase the weld depth with the same laser welding parameters. It is also ...

    $28.00

  • ICALEO 2009 Paper #405 (Study on Welding of 2024 Aluminum Alloy Sheet with Disc Laser)

    Study on Welding of 2024 Aluminum Alloy Sheet with Disc Laser
    Authors:
    Xudong Zhao, Beijing University of Technology; Beijing Peoples Republic of China
    Rongshi Xiao, Beijing University of Technology; Beijing Peoples Republic of China
    Kai Chen, Beijing University of Technology; Beijing Peoples Republic of China
    Presented at ICALEO 2009

    In the fields of medical equipment manufacturing and aerospace engineering, aluminum alloys are widely applied to make the shells of the electronic devices. Laser welding is considered as a suitable technology to produce those components for the lower heat input and higher joint strength. In this paper, a 4.0kW disc laser was used to weld...

    $28.00

  • ICALEO 2009 Paper #404 (Laser Beam Welding with Hypereutectic ALSI Filler Material)

    Laser Beam Welding with Hypereutectic ALSI Filler Material
    Authors:
    Thomas Seefeld, BIAS; Bremen Germany
    Frank Buschenhenke, Bias; Bremen Germany
    Frank Vollertsen, Bias; Bremen Germany
    Presented at ICALEO 2009

    For laser welding of AlMgSi (6xxx) alloys filler alloys are commonly required to reduce the hot cracking susceptibility by rising the silicon content in the weld pool to a non critical value. For slender welds obtained e.g. in welding with high brightness lasers, this is often difficult to achieve. The use of hypereutectic Al-Si filler materials might be helpful; however these fillers are not readily available in the form of thin wire. In the present work, hypere...

    $28.00

  • ICALEO 2009 Paper #403 (Weld Strength Improvement for Al Alloy by using Laser Weaving Method)

    Weld Strength Improvement for Al Alloy by using Laser Weaving Method
    Authors:
    Kwang-Deok Choi, -; -
    Young-Nam Ahn, -; -
    Cheolhee Kim, KITECH; Yeonsu-gu South Korea
    Presented at ICALEO 2009

    In Al alloy welding, the linear laser welds have the shear-tensile strength lower than that of the base metal because of porosities and cracks resulting from unstable keyhole and high crack sensitivity. Various techniques have been introduced to improve the joint strength of laser welds and the laser weaving is also an alternative. In this research, Al alloy sheets were used as the base material with a thickness of 1mm, and lap welding and bead-on-plate crack test were implemented...

    $28.00

  • ICALEO 2009 Paper #401 (Statistical Analysis of Low Porosity Laser Welding of Ti Alloys using a Directed Gas Jet)

    Statistical Analysis of Low Porosity Laser Welding of Ti Alloys using a Directed Gas Jet
    Authors:
    Jonathan Blackburn, The University of Manchester; Manchester Great Britain
    Chris Allen, TWI Ltd; Cambridge Great Britain
    Paul Hilton, TWI Ltd; Cambridge Great Britain
    Lin Li, The University of Manchester; Manchester Great Britain
    Presented at ICALEO 2009

    Titanium alloys are increasingly utilized in the aerospace sector as a result of their high specific strength, fatigue performance and corrosion resistance. It has been reported previously by the authors that high quality, low internal porosity content welds can be made in titanium alloys using near-infrared l...

    $28.00

Pages

There is currently no content classified with this term.