Exciting News—A New LIA Website Is Coming Soon!

Get ready for a fresh design, enhanced usability, and improved accessibility. Click here for a sneak peek!

  • ICALEO 2009 Paper #1807 (Qualification of HLAW of HSLA-80 Under Naval Vessel Rules)

    Qualification of HLAW of HSLA-80 Under Naval Vessel Rules
    Authors:
    Paul Blomquist, Applied Thermal Sciences, Inc.; Sanford ME USA
    Carl Chretien, -; -
    Erik Oller, Concurrent Technologies Corp; - USA
    Brian Marx, Concurrent Technologies Corp; - USA
    Presented at ICALEO 2009

    Procedures have been developed for Hybrid Laser Arc Welding (HLAW) of HSLA-80 and approved by the American Bureau of Shipping (ABS) for use in the construction of naval combatant vessels built under Naval Vessel Rules (NVR). This paper discusses problems encountered and solutions generated during the development sequence, especially in achieving satisfactory Charpy V-Notch (CVN) impact pr...

    $28.00

  • ICALEO 2009 Paper #1806 (Weldability of Austenitic and Dual Phase Stainless Steel on Fiber Laser Welding for Pipe Industry)

    Weldability of Austenitic and Dual Phase Stainless Steel on Fiber Laser Welding for Pipe Industry
    Authors:
    Mok-Young Lee, RIST; Pohang South Korea
    Presented at ICALEO 2009

    Stainless steels were widely used for corrosive environments because they have high corrosion resistant properties. But the price of them was higher compared with carbon steel products, due to high cost of raw materials and low productivity. Laser welding has some advantages over conventional GTA welding process such as high welding speed, narrow bead width, excellent weld performance and saving of filler wire. From making stainless steel tube with laser welding, we reduce the price at the same time increase the quality. The ...

    $28.00

  • ICALEO 2009 Paper #1805 (Prevention of Porosity by Oxygen in Partial Penetration Laser and Laser-GMA Hybrid Welding)

    Prevention of Porosity by Oxygen in Partial Penetration Laser and Laser-GMA Hybrid Welding
    Authors:
    Susumu Tsukamoto, National Institute for Materials Science; Tsukuba, Ibaraki Japan
    Lin Zhao, National Institute for Materials Science; Tsukuba Japan
    Goro Arakane, National Institute for Materials Science; Tsukuba Japan
    Tomohiro Sugino, Ihi Corp.; Yokohama Japan
    Presented at ICALEO 2009

    Prevention of the porosity has been attempted in partial penetration laser and laser/arc hybrid welding of heavy section steel plates. Bead on plate welding was carried out on 0.10C-0.30Si-1.33Mn steel (JIS SM490A) using 7 kW fibre laser and pulsed GMA. Laser power modulatio...

    $28.00

  • ICALEO 2009 Paper #1804 (High-power Fiber Laser Butt Welding of Thick High-strength Steel Plate using Sensing System with Hot Wire)

    High-power Fiber Laser Butt Welding of Thick High-strength Steel Plate using Sensing System with Hot Wire
    Authors:
    Terumasa Onishi, JWRI; Ibaraki City, Osaka Japan
    Masami Mizutani, Jwri; Ibaraki City Japan
    Yousuke Kawahito, Jwri; Ibaraki City Japan
    Seiji Katayama, Jwri; Ibaraki City Japan
    Presented at ICALEO 2009

    Welding of thick high-strength steel plates without preheating or post-heating is expected in many industries. A high-power and high-brightness fiber laser is promising as one of the desirable heat sources for high-speed and deep-penetration welding. However, such a small beam spot has a low gap tolerance for butt welding. In this study, theref...

    $28.00

  • ICALEO 2009 Paper #1803 (Short Focal Length Scanner,Fiber Laser Welding Of Stainless Steel Sheets And Tubular Products)

    Short Focal Length Scanner,Fiber Laser Welding Of Stainless Steel Sheets And Tubular Products
    Authors:
    Mikko Vänskä, Lappeenranta University of Technology / Outokumpu Stainless Tubular Products Oy Ab; Pietarsaari Finland
    Veli Kujanpää, Lappeenranta University of Technology / VTT Industrial Systems; Lappeenranta Finland
    Elin Westin, Outokumpu Stainless Ab, Avesta Research Center; Avesta Sweden
    Terho Torvinen, Outokumpu Stainless Tubular Products Oy Ab; Pietarsaari Finland
    Presented at ICALEO 2009

    The fiber laser has generally better beam quality than the CO2-laser. This would normally be a positive effect, but also it causes limitations. Welding of join...

    $28.00

  • ICALEO 2009 Paper #1802 (Influence of Oxygen on Weld Geometry in Fibre Laser Welding)

    Influence of Oxygen on Weld Geometry in Fibre Laser Welding
    Authors:
    Lin Zhao, National Institute for Materials Science; Tsukuba Japan
    Susumu Tsukamoto, National Institute for Materials Science; Tsukuba Japan
    Goro Arakane, National Institute for Materials Science; Tsukuba Japan
    Tomohiro Sugino, Ihi Corp.; Yokohama Japan
    Presented at ICALEO 2009

    Oxygen can significantly increase the penetration depth in arc welding. It is caused by change in the Marangoni flow direction from outward to inward with increasing the oxygen content. Increase in the penetration depth by oxygen was also reported in laser welding by some researchers, but the mechanism is still uncl...

    $28.00

  • ICALEO 2009 Paper #1801 (Cover Glass Influence on High Power Fiber Laser Induced Focus Shift)

    Cover Glass Influence on High Power Fiber Laser Induced Focus Shift
    Authors:
    Daniel Reitemeyer, BIAS - Bremer Institut fuer angewandte Strahltechnik GmbH; Bremen Germany
    Thomas Seefeld, BIAS - Bremer Institut fuer angewandte Strahltechnik GmbH; Bremen Germany
    Frank Vollertsen, BIAS - Bremer Institut fuer angewandte Strahltechnik GmbH; Bremen Germany
    Jean Pierre Bergmann, Jenoptik Automatisierungstechnik GmbH; Jena Germany
    Presented at ICALEO 2009

    The condition of the optics of a processing head is an influencing factor on the focus stability at laser beam welding with high brilliance laser beam sources. The small percentage of laser light absorbed in the o...

    $28.00

  • ICALEO 2009 Paper #1709 (Three-Dimensional Texturing and Patterning of Woven Textiles using Purpose Designed Fabric Structures)

    Three-Dimensional Texturing and Patterning of Woven Textiles using Purpose Designed Fabric Structures
    Authors:
    Janette Matthews, Loughborough University; Loughborough Great Britain
    Kerry Walton, Loughborough University; Loughborough Great Britain
    John Tyrer (Presenter not author), Loughborough University; -
    Presented at ICALEO 2009

    Laser processing of textile substrates is embedded in manufacturing systems for cutting and surface patterning through marking. A number of challenges exist with the processing of natural fibres and natural fibre blends such as cashmere, lambs wool and silk. This paper shows how the response of a luxury textile may be favourably influence...

    $28.00

  • ICALEO 2009 Paper #1708 (Precision Cutting & Drilling Metals with a Fiber Laser Marker)

    Precision Cutting & Drilling Metals with a Fiber Laser Marker
    Authors:
    Hongqiang Chen, Miyachi Unitek Corporation; Pasadena CA USA
    Geoff Shannon, Miyachi Unitek Corporation; Monrovia CA USA
    Presented at ICALEO 2009

    Certain fiber laser markers with the necessary peak powers and pulse parameter flexibility offer a unique cost effective system for precision cutting and drilling. It can provide dimensional cut repeatability to sub 10 microns, cut or drill material up to 0.5mm with minimal to no burring, and offer multi axis motion options. The material removal mechanism of the new process in relation to pulse parameters is described, along with examples of high quality cutting and dril...

    $28.00

  • ICALEO 2009 Paper #1707 (Study on the Characteristics of Debris and Hole Diameter in Laser Drilling of Thick Alumina Ceramics)

    Study on the Characteristics of Debris and Hole Diameter in Laser Drilling of Thick Alumina Ceramics
    Authors:
    Yinzhou Yan, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Lingfei Ji, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Yong Bao, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Yijian Jiang, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Presented at ICALEO 2009

    Characterizations of debris and hole diameter on a 4.4 mm alumina ceramic which ...

    $28.00

Pages

There is currently no content classified with this term.