ICALEO 2008 Paper #N101 (Optical Trap Assisted Nanoscale Laser Direct-Write Patterning (Invited Presentation - 40 Minutes))
Optical Trap Assisted Nanoscale Laser Direct-Write Patterning (Invited Presentation - 40 Minutes)
Authors:
James Joy, Princeton University; Princeton NJ USA
Euan Mcleod, University of Princeton; Princeton NJ USA
Craig B. Arnold, Princeton University; Princeton NJ USA
Presented at ICALEO 2008
The ability to directly print patterns on size scales below 100 nm is important for many applications where the production or repair of high resolution and density features are important. Laser based direct-write methods have the benefit of quickly and easily being able to modify and create structures on existing devices, but feature sizes are conventionally limited by diffraction...$28.00
ICALEO 2008 Paper #M904 (Excimer Laser Annealing of Zno Nanoparticles for Thin Film Transistor Fabrication)
Excimer Laser Annealing of Zno Nanoparticles for Thin Film Transistor Fabrication
Authors:
Heng Pan, University of California - Berkeley; Berkeley CA USA
Nipun Misra, University of California - Berkeley; Berkeley CA USA
Seung H. Ko, University of California - Berkeley; Berkeley CA USA
Costas P. Grigoropoulos, University of California - Berkeley; Berkeley CA USA
Presented at ICALEO 2008
Zinc oxide nanoparticle solutions have been considered promising for realizing low cost printable high performance flexible electronics. Solution deposited and laser annealed zinc oxide nanoparticle thin film field effect transistors have been fabricated without using conve...$28.00
ICALEO 2008 Paper #M903 (Excimer Laser Induced Photoresist Stripping on the Silicon Wafer)
Excimer Laser Induced Photoresist Stripping on the Silicon Wafer
Authors:
Hoon Jeong, Kitech; Cheonan South Korea
Jae Dong Song, Kitech; Cheonan South Korea
Ji-Young Baek, Korea Institute of Industrial Technology; CheonAnsi South Korea
Myong-Hwa Lee, Kitech; Cheonan South Korea
Sang Bum Kim, Kitech; Cheonan South Korea
Gyung Soo Kim, Kitech; Cheonan South Korea
Presented at ICALEO 2008
There is a growing interest to develop a new cleaning technology to preclude the undesirable effects of wet cleaning technologies such as environmental pollution and the low cleaning efficiency on the modern electronic industry and data storage in...$28.00
ICALEO 2008 Paper #M902 (Gallium Nitride Led Shaping by Dpss Laser Processing)
Gallium Nitride Led Shaping by Dpss Laser Processing
Authors:
A Dixit, National Centre for Laser Applications; Galway Ireland
D O' Mahony, Tyndall National Institute; Cork Ireland
F Parker, National Centre for Laser Applications; Galway Ireland
H Howard, National Centre for Laser Applications; Ireland Ireland
A Conneely, National Centre for Laser Applications; Galway Ireland
G.M. O' Connor, National Centre for Laser Applications; Galway Ireland
P Maaskant, Tyndall National Institute; Cork Ireland
T. Glynn, National Centre for Laser Applications; Galway Ireland
B Corbett, Tyndall National Institute; Cork Irelan...$28.00
ICALEO 2008 Paper #M901 (Machining of Metal Cathode of OLED by Femtosecond Laser (Invited Presentation - 40 Minutes))
Machining of Metal Cathode of OLED by Femtosecond Laser (Invited Presentation - 40 Minutes)
Authors:
Yoshiro Ito, Nagaoka University of Technology; Nagaoka Niigata Japan
Presented at ICALEO 2008
TBA$28.00
ICALEO 2008 Paper #M804 (High Average Power Ultrafast Fiber Amplifiers)
High Average Power Ultrafast Fiber Amplifiers
Authors:
Yoann Zaouter, Amplitude Systemes; Pessac France
Eric Cormier, University Bordeaux; Talence France
Eric Mottay, Amplitude Systemes; Pessac France
Presented at ICALEO 2008
The recent availability of high reliability Ytterbium ultrafast lasers has led to the rapid development of industrial applications of ultrafast lasers. Because of the moderate average power currently available, these industrial applications tend to be limited to high added value, low productivity processes. A significant increase of the average power of current ultrafast lasers is required to take advantage of the full potential of micro-machining...$28.00
ICALEO 2008 Paper #M803 (High Average Power Ultrafast Amplifier for Micromachining Applications)
High Average Power Ultrafast Amplifier for Micromachining Applications
Authors:
Martin Delaigue, Amplitude Systemes; Pessac France
Antoine Courjaud, Amplitude Systemes; Pessac France
Eric Mottay, Amplitude Systemes; Pessac France
Robert Braunschweig, Amplitude Laser; Cambridge MA USA
Presented at ICALEO 2008
Industrial applications of femtosecond lasers, notably in the field of precision micro-machining, are rapidly increasing. The quality and flexibility of the interaction process are well established. However, in order to fulfil the productivity requirement of industrial processes, it is necessary to continuously increase the average power of ultrafast l...$28.00
ICALEO 2008 Paper #M802 (Surface Plasmonic Nano-processing with Template of Dielectric Particle Array by Femtosecond Laser Pulse)
Surface Plasmonic Nano-processing with Template of Dielectric Particle Array by Femtosecond Laser Pulse
Authors:
Tetsuo Sakai, Keio University; Yokohamashi Japan
Henry Nugroho, Keio University; Hiyoshi Japan
Minoru Obara, Keio University; Yokohama-Shi Japan
Presented at ICALEO 2008
Nano-processing fabricated by near-field is becoming an emerging nanofabrication technology, because it can fabricate nano-scale structures even with near-infrared femtosecond laser. The near-field is generated by using dielectric nano-spherical particles with femtosecond laser. The dielectric particle acts as micro-lens and Mie scatterers, and then incident light is focused onto the nano-sc...$28.00
ICALEO 2008 Paper #M801 (Ablation Shape Determination Under Ultrafast Laser Pulse Irradiation (Invited Presentation - 40 Minutes))
Ablation Shape Determination Under Ultrafast Laser Pulse Irradiation (Invited Presentation - 40 Minutes)
Authors:
Hai-Lung Tsai, The Missouri University of Science & Technology (Formerly University of Missouri-Rolla); Rolla MO USA
Lan Jiang, Beijing Institute of Technology; Beijing Peoples Republic of China
Presented at ICALEO 2008
Based on the time when collisions govern the evolution of the phenomena, modeling of ultrafast laser-dielectrics interactions can be divided into three stages: 1) femtosecond pulse absorption through photon-electron interactions, including electron heating, excitation and generation; 2) electron-ion interactions, including energy transport, phase change...$28.00
ICALEO 2008 Paper #M704 (CO2 Laser Resonant Excitation of Propylene Molecules in Diamond Deposition using Combustion-flame Method)
CO2 Laser Resonant Excitation of Propylene Molecules in Diamond Deposition using Combustion-flame Method
Authors:
Z.Q. Xie, University of Nebraska-Lincoln; Lincoln NE USA
H. Ling, University of Nebraska-Lincoln; Lincoln NE USA
Y.X. Han, University of Nebraska-Lincoln; Linciln NE USA
X.K. Shen, University of Nebraska-Lincoln; Lincoln NE USA
T. Gebre, University of Nebraska-Lincoln; Lincoln NE USA
Y.F. Lu, University of Nebraska-Lincoln; Lincoln NE USA
Presented at ICALEO 2008
CO2 laser resonant excitation of propylene molecules was investigated in propylene/oxygen (C3H6/O2) combustion diamond deposition in open air. The wavelength...$28.00
Pages
There is currently no content classified with this term.