ICALEO 2007 Paper #N106 (Conductive Paper Through Cellulose Microfibers/Carbon Nanotubes Composite)
Conductive Paper Through Cellulose Microfibers/Carbon Nanotubes Composite
Authors:
Kody Varahramyan, Louisiana Tech University; Ruston LA USA
Mangilal Agarwal, Louisiana Tech University; Ruston LA USA
Yuri Lvov, Louisiana Tech University; Ruston LA USA
Z Zheng, Louisiana Tech University; Ruston LA USA
Nicholas Kotov, University of Michigan; Ann Arbor MI USA
Presented at ICALEO 2007
A layer-by-layer (LbL) nanoassembly of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT-PSS) and carbon nanotubes on lignocellulose wood microfibers has been utilized to make conductive fibers and paper. Polycation poly(ethyleneimine) (PEI) has been us...$28.00
ICALEO 2007 Paper #N105 (Nanostructure Fabrication and Characterization on Crystal Silicon Substrates using Laser-assisted Scanning Tunneling Microscope)
Nanostructure Fabrication and Characterization on Crystal Silicon Substrates using Laser-assisted Scanning Tunneling Microscope
Authors:
K.J. Yi, University of Nebraska - Lincoln; Lincoln NE USA
Z.Y. Yang, University of Nebraska - Lincoln; Lincoln NE USA
Yongfeng Lu, University of Nebraska - Lincoln; Lincoln NE USA
Presented at ICALEO 2007
As a promising approach to meet the critical requirement of shrinking feature size down to nanoscales for future electronic industry, laser-assisted scanning tunneling microscope (STM) demonstrates its capabilities of nanostructure fabrication by means of extremely localized heating induced by highly concentrated and greatly enhanced...$28.00
ICALEO 2007 Paper #N104 (Application of Dynamic Maskless Holographic Lithography)
Application of Dynamic Maskless Holographic Lithography
Authors:
Nathan J. Jenness, Duke University; Durham NC USA
Daniel G. Cole, University of Pittsburgh; Pittsburgh PA USA
Robert L. Clark, Duke University; Durham NC USA
Presented at ICALEO 2007
Maskless patterning techniques are increasingly implemented in materials research and manufacturing eliminating the need for masks
or masters. Recent utilization of these techniques for biological
patterning demonstrates the potential for successful application in
various fields. We present a new lithographic process, dynamic
maskless holographic lithography (DMHL), for the real-time
configuration and arbitrary positioni...$28.00
ICALEO 2007 Paper #N103 (Large Area Laser Parallel Fabrication of User-Defined Nanopatterns by Particle-Lens Arrays)
Large Area Laser Parallel Fabrication of User-Defined Nanopatterns by Particle-Lens Arrays
Authors:
David Whitehead, University of Manchester; Manchester Great Britain
Wei Guo, The University of Manchester; Manchester Great Britain
Zengbo Wang, The University of Manchester; Manchester Great Britain
Boris Luk'yanchuk, Data Storage Institute; Singapore Singapore
Lin Li, The University of Manchester; Manchester Great Britain
Zhu Liu, The University of Manchester; Manchester Great Britain
Presented at ICALEO 2007
Direct parallel writing nano-patterns over a large surface area is a challenging task. Techniques like electron beam and fo...$28.00
ICALEO 2007 Paper #N102 (Glucose Biosensor on Cellulose Microfibers Through Layer-By-Layer Nanoassembly (Invited Paper - 40 Minute Presentation))
Glucose Biosensor on Cellulose Microfibers Through Layer-By-Layer Nanoassembly (Invited Paper - 40 Minute Presentation)
Authors:
Kody Varahramyan, Louisiana Tech University; Ruston LA USA
Mangilal Agarwal, Louisiana Tech University; Ruston LA USA
Q Xing, Louisiana Tech University; Ruston LA USA
Yuri Lvov, Louisiana Tech University; Ruston LA USA
Presented at ICALEO 2007
A paper-based glucose biosensor on cellulose wood microfiber has been developed based on the layer-by-layer (LbL) nanoassembly technique. LbL nanoassembly is a versatile and easy to use technique based on sequential deposition of oppositely charged polyelectrolytes or nanoparticles on surf...$28.00
ICALEO 2007 Paper #N101 (Commercialization of Emerging Technologies: Proven Strategies for Success (Keynote Presentation - 40 Minute Presentation))
Commercialization of Emerging Technologies: Proven Strategies for Success (Keynote Presentation - 40 Minute Presentation)
Authors:
Thomas Cellucci, Cellucci Associates, Inc.; Dallas TX USA
Presented at ICALEO 2007
Harnessing the ability to cost-effectively and efficiently develop market-driven products and services is crucial for success in business today. A set of guiding principles and practical strategies to start and profitably grow a high-technology business based on an emerging technology, such as nanotechnology will be discussed. Ample references are supplied for the reader to delve deeply into the real-world application of these principles and strategies discussed.$28.00
ICALEO 2007 Paper #M906 (Effect of the Double Pulse Format for Picosecond Pulse Laser Drilling in Metals)
Effect of the Double Pulse Format for Picosecond Pulse Laser Drilling in Metals
Authors:
Benjamin R. Campbell, Penn State Electro-Optics Center; Freeport PA USA
Jeffrey G. Thomas, Penn State Electro-Optics Center; Freeport PA USA
Thomas M. Lehecka, Penn State Electro-Optics Center; Freeport PA USA
Vladimir V. Semak, Penn State Electro-Optics Center; Freeport PA USA
Presented at ICALEO 2007
Using commercially available picosecond and nanosecond lasers, tests were conducted to compare the drilling performance of each laser through various materials. Experiments were performed to measure and compare conventional percussion drilling performance with the doubl...$28.00
ICALEO 2007 Paper #M902 (Investigation on Laser Micro Ablation of Steel using Ps-Ir Pulse Bursts)
Investigation on Laser Micro Ablation of Steel using Ps-Ir Pulse Bursts
Authors:
Arnold Gillner, Fraunhofer Institut für Lasertechnik; Aachen Germany
Claudia Hartmann, Fraunhofer Institut für Lasertechnik; Aachen Germany
Presented at ICALEO 2007
Laser micro structuring is used for many applications in areas like electronics, sensor systems, medicine but also in the tooling industry. For the establishment of the laser ablation technique in these industries a fast, precise and reproducible process is needed.
Today for precise laser ablation single nanosecond pulses with time spacings between pulses in the range of 10 µs are used. Ablation rates between 0.1 and 1 mm³/min are achi...$28.00
ICALEO 2007 Paper #M901 (Femtosecond Laser Micromachining of Metal Surfaces for Lubrication Enhancement)
Femtosecond Laser Micromachining of Metal Surfaces for Lubrication Enhancement
Authors:
Hae Woon Choi, OSU; Columbus OH USA
Yong Chae Lim, OSU; Columbus OH USA
Dave Farson, Ohio State University; Columbus OH USA
Rajiv Shivpuri, OSU; Columbus OH USA
Yuanjie Wu, OSU; Columbus OH USA
Presented at ICALEO 2007
High interface friction is a primary cause for adhesive pickup in cold forging and extrusion of aluminum alloys and of wear of sliding surfaces in thrust bearings and seals. This poster describes investigations of femtosecond laser texturing for reduction of interface friction on sliding surfaces. Direct-write femtosecond pulsed laser micr...$28.00
ICALEO 2007 Paper #M806 (Efficient Laser Material Processing using Beam Shaping Optics)
Efficient Laser Material Processing using Beam Shaping Optics
Authors:
Jim Bovatsek, Newport-Spectra Physics; Mountain View CA USA
Rajesh Patel, Newport-Spectra Physics; Mountain View CA USA
Presented at ICALEO 2007
High-power, diode pumped solid state (DPSS) laser processing has become commonplace in both existing and emerging high-tech industries. As these industries grow and mature, there is an increased need for low-cost, high-quality manufacturing techniques. This translates to a demand for increasingly precise and efficient laser processing capabilities. In this work, Newports latest DPSS laser technology is combined with optical beam-shaping techniques to explore the r...$28.00
Pages
There is currently no content classified with this term.