ICALEO 2007 Paper #2003 (Automated Laser Fabrication of High Performance Saw Blades)

Automated Laser Fabrication of High Performance Saw Blades
Authors:
Christ Prakash Paul, University of Waterloo; Waterloo, ON ON Canada
Mehrdad Iravani, University of Waterloo; Waterloo ON Canada
Amir Khajepour, University of Waterloo; Waterloo ON Canada
Stephen Corbin, University of Waterloo; Waterloo ON Canada
Presented at ICALEO 2007

ALFa is an emerging computer-aided manufacturing technology that uses a laser beam to melt and deposit the injected powder to fabricate near net shape 3-D components and add delicate features onto the existing components with short turn around time in a layer-by-layer fashion by metal deposition. Recently, we have extended ...

ICALEO 2007 Paper #2001 (High Chromium Coating by Laser Deposition of IN 690 for Repairing Nuclear Power Plant Components)

High Chromium Coating by Laser Deposition of IN 690 for Repairing Nuclear Power Plant Components
Authors:
Minlin Zhong, Tsinghua University; Beijing Peoples Republic of China
Qian Hao, Tsinghua Univ.; Beijing Peoples Republic of China
Renjie Zhu, Tsinghua University; Beijing Peoples Republic of China
Wenjin Liu, Tsinghua University; Beijing Peoples Republic of China
Hongjun Zhang, Tsinghua University; Beijing Peoples Republic of China
Presented at ICALEO 2007

Early nuclear power plant components were normally made with Stainless Steel ANSI 316L due to its good anticorrosion property before they are replaced by In 600 or In 690 alloys in recent...

ICALEO 2007 Paper #1907 (Process Control in Laser Manufacturing - Dream or Reality?)

Process Control in Laser Manufacturing– Dream or Reality?
Authors:
Michael Schmidt, Bayerisches Laserzentrum GmbH; Erlangen Germany
Florian Albert, Bayerisches Laserzentrum GmbH; Erlangen Germany
Thomas Frick, Bayerisches Laserzentrum GmbH; Erlangen Germany
Alexander Grimm, Bayerisches Laserzentrum GmbH; Erlangen Germany
Christian Kägeler, Bayerisches Laserzentrum GmbH; Erlangen Germany
Matthias Rank, Bayerisches Laserzentrum GmbH; Erlangen Germany
Katja Tangermann-Gerk, Bayerisches Laserzentrum GmbH; Erlangen Germany
Presented at ICALEO 2007

Looking at the status of control techniques in laser manufacturing proces...

ICALEO 2007 Paper #1906 (Novel Machine System for Simultaneous Heat Treatment with Dynamic Beam Shaping)

Novel Machine System for Simultaneous Heat Treatment with Dynamic Beam Shaping
Authors:
Steffen Bonss, Fraunhofer IWS; Dresden Germany
Frank Tietz, Fraunhofer IWS; Dresden Germany
Jan Hannweber, Fraunhofer IWS; Dresden Germany
Marko Seifert, Fraunhofer IWS; Dresden Germany
Stefan Kuehn, Fraunhofer IWS; Dresden Germany
Udo Karsunke, Fraunhofer IWS; Dresden Germany
Berndt Brenner, Fraunhofer IWS; Dresden Germany
Eckhard Beyer, Fraunhofer IWS; Dresden Germany
Presented at ICALEO 2007

Laser beam hardening has been established during the last years as a complementary technology for local heat treatment tasks a...

ICALEO 2007 Paper #1905 (Advances in Laser-Deposition Equipment and Capabilities)

Advances in Laser-Deposition Equipment and Capabilities
Authors:
Richard Grylls, Optomec; Albuquerque NM USA
Thierry Marchione, Optomec Inc.; Albuerque NM USA
David Keicher, Optomec Inc.; Albuerque NM USA
Presented at ICALEO 2007

Laser Deposition techniques are gaining wider acceptance within manufacturing industries for both repair and rapid manufacture of metal components. The Laser Engineered Net Shaping (LENS®) process is one of the leading techniques in this field. Multiple LENS systems are now employed at DoD and other facilities, repairing a variety of high-performance components. In this role, LENS can be employed to shorten overhaul cycle times, and in so...

ICALEO 2007 Paper #1904 (Experience with Shipyard Installation of a Hybrid Pipe Welding System)

Experience with Shipyard Installation of a Hybrid Pipe Welding System
Authors:
Edward Reutzel, Arl, the Penn State University; State College PA USA
Jay Tressler, Arl, the Penn State University; State College PA USA
Ludwig Kern, Arl, the Penn State University; State College PA USA
Michael Sullivan, General Dynamics Nassco; San Diego CA USA
Presented at ICALEO 2007

Laser-Gas Metal Arc (GMA) hybrid welding is fast making the transition from laboratory to production, in industries as diverse as shipbuilding to automobile manufacture. For the past 3 years, our team has striven to both develop a hybrid welding process for steel pipe, and to specify, build, and ...

ICALEO 2007 Paper #1902 (Additive Manufacturing and Repair: Where Do Lasers Fit In?)

Additive Manufacturing and Repair: Where Do Lasers Fit In?
Authors:
James Sears, South Dakota School of Mines & Technology; Rapid City SD USA
Presented at ICALEO 2007

Lasers are currently being used in many facets of Additive Manufacturing and repair. Cladding is probably the most wide spread use of lasers in additive manufacturing. There is also a growing use of laser technology for repair applications. Laser additive manufacturing for directly building complete structures has been limited but also seems to be growing. Lasers have been the choice when automation and low heat input are required. So how does laser technology compare to other methods (e.g., electron beam, plasma transferred a...

ICALEO 2007 Paper #1901 (Perimetric Sensor for the Detection and Following of Complex Seam Trajectories in Robotic Laser Welding)

Perimetric Sensor for the Detection and Following of Complex Seam Trajectories in Robotic Laser Welding
Authors:
Dimitrios Iakovou, University of Twente; Enschede Netherlands
Johan Meijer, University of Twente; Enschede Netherlands
Ronald Aarts, Univercity of Twente; Enschede Netherlands
Ben Jonker, University of Twente; Enschede Netherlands
Presented at ICALEO 2007

The use of robotic laser welding is increasing among industrial applications, because of its ability to weld objects in three dimensions. Automatic seam detection and following can be accomplished with the aid of seam detection sensors. The majority of the available sensors apply optical triang...

ICALEO 2007 Paper #1808 (A Coupled Time-Dependent Numerical Simulation on Temperature and Stress Fields in Laser Solid Freeform Fabrication Process)

A Coupled Time-Dependent Numerical Simulation on Temperature and Stress Fields in Laser Solid Freeform Fabrication Process
Authors:
Masoud Alimardani, Department of Mechanical and Mechatronics Engineering, University of Waterloo; Waterloo ON Canada
Ehsan Toyserkani, Department of Mechanical and Mechatronics Engineering, University of Waterloo; Waterloo ON Canada
Jan P. Huissoon, Department of Mechanical and Mechatronics Engineering, University of Waterloo; Waterloo ON Canada
Presented at ICALEO 2007

This paper presents a coupled 3D time-dependent numerical approach for modeling laser solid freeform fabrication by which the geometry of the deposited materials, temperatu...

ICALEO 2007 Paper #1806 (A Verified Model of Laser Direct Metal Deposition using an Analytical Enthalpy Balance Method)

A Verified Model of Laser Direct Metal Deposition using an Analytical Enthalpy Balance Method
Authors:
Andrew Pinkerton, The University of Manchester; Manchester Great Britain
Kamran Shah, The University of Manchester; Manchester Great Britain
Richard Moat, The University of Manchester; Manchester Great Britain
Lin Li, The University of Manchester; Manchester Great Britain
Michael Preuss, The University of Manchester; Manchester Great Britain
Philip Withers, The University of Manchester; Manchester Great Britain
Presented at ICALEO 2007

Analytical modelling of a quasi-stationary laser melt pool without mass addition can be achieve...