ICALEO 2005 Paper #806 (Study of Polymers Laser Grooving by Using the Analysis of Variance Method)

Study of Polymers Laser Grooving by Using the Analysis of Variance Method
Authors:
Adelina Han, LTm; Chalon Sur Saone France
Alexandru Nichici, University Politechnic of Timisoara; Timisoara Romania
Dominique Grevey, LTm; Le Creusot France
Gianni Pillon, LTm; Chalon Sur Saone France
Presented at ICALEO 2005

Although polymers laser processing is a relative recently technological procedure, the remarkable results obtained are encouraging the continuation of the researches with the purpose of extending its utilization. Laser processing is difficult to control because of the nature and complexity of the phenomena and processes that are developing among the las...

ICALEO 2005 Paper #805 (A 2-D Thermal Model for Laser Transmission Welding of Thermoplastics)

A 2-D Thermal Model for Laser Transmission Welding of Thermoplastics
Authors:
Gene Zak, Queen's University; Kingston ON Canada
Layla Mayboudi, Queen's University; Kingston ON Canada
Presented at ICALEO 2005

Recent years have seen wider application of laser transmission welding (LTW) as a means for joining plastic components. Advantages of LTW arise from it being a contact-free method for delivering precisely controlled energy to the weld interface. LTW involves a laser beam passing through a laser-transparent component and subsequently being absorbed by the laser-absorbent component near the weld interface. Heat generated at the interface melts a thin layer of plastic in both co...

ICALEO 2005 Paper #803 (Laser Welding of Polymers - New Innovations for Joining 3D Geometries)

Laser Welding of Polymers - New Innovations for Joining 3D Geometries
Authors:
Saara Kouvo, LUT Laser Processing Laboratory; Lappeenranta Finland
Anssi Jansson, VTT Industrial Systems; Lappeenranta Finland
Antti Salminen, LUT Laser Processing Laboratory; Lappeenranta Finland
Presented at ICALEO 2005

Laser welding is quite well established technology to join plastics. There are several different techniques to join plastics that have been demonstrated recently in different cases. The currently used techniques are contour welding, quasi-simultaneous welding, simultaneous welding and mask welding. Each of these techniques has their pros and cons. The product designers push...

ICALEO 2005 Paper #802 (Effects of Laser Beam Scattering on Through-Transmission Welding of Polymers)

Effects of Laser Beam Scattering on Through-Transmission Welding of Polymers
Authors:
Jean-Christophe Kneip, LTm Laboratory - Univ. of Burgandy; Chalon sur Saone France
Alexandru Nichici, University Politechnic of Timisoara; Timisoara Romania
Mariana Ilie, LTm - IUT Le Creusot; Chalon sur Saone France
Simone Mattei, LTm; Le Creusot France
Presented at ICALEO 2005

Laser technology development in the field of plastics processing is now rapidly expanding and opens up a wide range of applications in various industrial fields that could not have been conceived of only a few years ago (automotive, plastic objects, packaging, ?). Among these processes, through-tr...

ICALEO 2005 Paper #801 (Quasi-Simultaneous Laser Welding of Polymers - The Process and Applications for Mass-Production)

ICALEO 2005 Paper #707 (Finnish Laser Innovation Commercialization Challenge)

Finnish Laser Innovation Commercialization Challenge
Authors:
Petri Rahja, Iprbox Oy; Espoo Finland
Presented at ICALEO 2005

As being one of the most innovative countries in the world, Finland is also producing many inventions on the laser industry arena. The small home economy does not provide good enough business landscape for Finnish laser technology companies to grow. Finding global partners to startup new business is hard. In Finland, many good inventions have been left undone because of lack of global partners and investors. The presentation will introduce model created by iprbox to overcome the current barrier.

ICALEO 2005 Paper #704 (Is Your Business Missing the Stage?)

Is Your Business Missing the Stage?
Authors:
William Lawson, Lawson, Lawson & Associates; Somerset WI USA
Presented at ICALEO 2005

Is your business in an Early Market, Emerging Market, Mature Market or Declining Market stage? Is your business focusing on the stage you are in or some other stage? What stage is the customer in compared to the average for the market? Selling to the stage the customer is in is key to success.

We all know of businessmen successful with one company who start a new company or a new initiative in their existing company and fall flat on their faces. They had assumed all businesses are alike and/or that the new business was in a market at the same stage as the p...

ICALEO 2005 Paper #703 (Specialty Manufacturing - Making Money and Having Fun)

ICALEO 2005 Paper #701 (International Linking of Research and Development on the Model of Laser Centre Hanover)

International Linking of Research and Development on the Model of Laser Centre Hanover
Authors:
Klaus Nowitzki, EOS-European Optical Society; Hannover Germany
Olaf Bker, Laser Zentrum Hannover e.V.; Hannover Germany
Presented at ICALEO 2005

Asia is becoming one of the most important regions in the world from the political, economic and scientific point of view. Germany believes that it is becoming increasingly necessary to cooperate with certain Asian countries especially for scientific and technological reasons. Above and beyond exchanges of scientists, it is increasingly being organized to cover projects with specific targets and to find solutions to important problems. Inte...

ICALEO 2005 Paper #610 (Laser Deposition of Refractory Mo-Ni Alloy)

Laser Deposition of Refractory Mo-Ni Alloy
Authors:
Minlin Zhong, Tsinghua University; Beijing China
Ting Huang, Tsinghua University; Beijing China
Wenjin Liu, Tsinghua University; Beijing China
Presented at ICALEO 2005

Laser direct deposition is good at manufacturing specific metallic components like refractory metal component with complicated geometry, which is very difficult or impossible by conventional method.
The paper presents research on producing high melting point Molybdenum alloy component by laser deposition. The temperature in a laser deposition melt pool is usually less than the melting point of Mo, so the fed Mo powder will not melt but dissolve into ...