ICALEO 2013 Paper #408 (2D Modeling of Surface Tension Effect During Laser Metal Cutting)
2D Modeling of Surface Tension Effect During Laser Metal Cutting
Authors:
El-Hachemi Amara, Centre for Development of Advanced Technologies; Algiers Algeria
Karim Kheloufi, Centre for Development of Avanced Technologies; Algiers Algeria
Toufik Tamsaout, Centre for Development of Advanced Technologies; Algiers Algeria
Presented at ICALEO 2013
The physical mechanisms occurring during laser metal cutting are widely studied with the aim to optimize the cutting process by acting on the operating parameters, in order to remove or reduce cutting defects such as striations and dross.
During cutting, the laser beam heats up and melts the workpiece, while an intense gas jet ...$28.00
ICALEO 2013 Paper #407 (A Finite Volume Alternate Direction Implicit Approach to Modelling Selective Laser Melting)
A Finite Volume Alternate Direction Implicit Approach to Modelling Selective Laser Melting
Authors:
Sankhya Mohanty, Technical University of Denmark; Kongens Lyngby Denmark
Jesper Hattel, Technical University of Denmark; Kongens Lyngby Denmark
Presented at ICALEO 2013
Over the last decade, several studies have attempted to develop thermal models for analyzing the selective laser melting process with a vision to predict thermal stresses, microstructures and resulting mechanical properties of manufactured products. While a holistic model addressing all involved phenomena is yet to emerge, the existing partial models have already become computationally heavy. This is observed to go ha...$28.00
ICALEO 2013 Paper #406 (Simulation of Process Dynamics in Laser Beam Brazing)
Simulation of Process Dynamics in Laser Beam Brazing
Authors:
Michael Dobler, Institute of Photonic Technologies and Erlangen Graduate School in Advanced Optical Technologies (Saot), University of Erlangen-Nuremberg; Erlangen Germany
Karl-Heinz Leitz, Institute of Photonic Technologies and Erlangen Graduate School in Advanced Optical Technologies (Saot), University of Erlangen-Nuremberg; Erlangen Germany
Andreas Otto, Institute for Production Engineering and Laser Technology, Vienna University of Technology; Vienna Austria
Michael Schmidt, Institute of Photonic Technologies and Erlangen Graduate School in Advanced Optical Technologies (Saot), University of Erlangen-Nurember...$28.00
ICALEO 2013 Paper #405 (Complete Heat and Fluid Flow Modeling of Keyhole Formation and Collapse During Spot Laser Welding)
Complete Heat and Fluid Flow Modeling of Keyhole Formation and Collapse During Spot Laser Welding
Authors:
Mickael Courtois, Limatb - Ea 4250; Lorient France
Muriel Carin, Limatb - Ea 4250; Lorient France
Philippe Le Masson, Limatb - Ea 4250; Lorient France
Sadok Gaied, Arcelormittal; Montataire
Mikhael Balabane, Institute Galilee Universite; Villentaneuse France
Presented at ICALEO 2013
During laser welding of metals, an important issue is the understanding of phenomena responsible for defects in the solidified welded joint. With the increasing of computation capabilities, models developed in recent years become more physic and need less an...$28.00
ICALEO 2013 Paper #404 (Numerical Simulation of a Combined Welding-Brazing Process. Application to an Aluminum-Titanium Heterogeneous Assembly)
Numerical Simulation of a Combined Welding-Brazing Process. Application to an Aluminum-Titanium Heterogeneous Assembly
Authors:
Morgan Dal, Pimm, Umr 8006 Cnrs - Arts Et Metiers Paristech; Paris France
Patrice Peyre, PIMM Laboratory (CNRS), Ecole Nationale Superieure d'Arts et Metiers; Paris France
Presented at ICALEO 2013
In this study, an heterogeneous Ti/Al assembly is proposed for the built of aircraft structures. This kind of structure combines advantages of both materials: the aluminum is light-weight and less expensive whereas the titanium offers superior mechanical properties. A welding/brazing assembly in overlap configuration is studied. The two materials are the aluminum...$28.00
ICALEO 2013 Paper #402 (Thermohydraulic Modeling of Pulsed Laser Welding)
Thermohydraulic Modeling of Pulsed Laser Welding
Authors:
Vincent Bruyere , CEA; Is sur Tille France
Charline Touvrey, Cea; Is Sur Tille France
Patrick Namy, cea; Grenoble France
Presented at ICALEO 2013
Nowadays, spot laser welding is a full fledged part of industrial manufacturing and is routinely used due to its advantage. It generates very located temperature gradients, and therefore, induces small distortions in the pieces.
Nonetheless, many welding tests are often performed in order to choose operating parameters leading to a narrow heat affected zones and defect-free joins.
This numerical study aims to increase our understanding of the link between operating p...$28.00
ICALEO 2013 Paper #401 (Numerical Simulation of Electromagnetic Melt Control Systems in High Power Laser Beam Welding)
Numerical Simulation of Electromagnetic Melt Control Systems in High Power Laser Beam Welding
Authors:
Marcel Bachmann, Bam Federal Institute for Materials Research and Testing; Berlin Germany
Vjaceslav Avilov, Bam Federal Institue for Materials Research and Testing; Berlin Germany
Andrey Gumenyuk, Bam Federal Institute for Materials Research and Testing; Berlin Germany
Michael Rethmeier, Bam Federal Institue for Materials Research and Testing; Berlin Germany
Presented at ICALEO 2013
The availability of laser sources with a powers of 20 kW upwards prepared the
ground for laser beam welding of up to 20 mm thick metal parts. Challenges are
the prevention o...$28.00
ICALEO 2013 Paper #304 (Bioactive Glass Coatings on Al2O3-Zro2 Composite Substrates by Laser Cladding for Orthopaedic Applications)
Bioactive Glass Coatings on Al2O3-Zro2 Composite Substrates by Laser Cladding for Orthopaedic Applications
Authors:
M. Angeles Montealegre, Aimen- Technology Centre; PorriñO Spain
Francesco Baino, Politecnico Di Torino; Torino Italy
Jorge Luis Arias, Aimen- Technology Centre; PorriñO Spain
Joaquim Minguella, FundacióNcim C/ Llorens I Artigas, 12; Barcelona Spain
Chiara Vitale-Brovarone, Politecnico Di Torino, 24; Torino Italy
Martyn Marshall, Glass Technology Services Ltd. 9 Churchill Way; Sheffield Great Britain
Presented at ICALEO 2013
Alumina-zirconia (Al2O3-ZrO2) composite is widely used as a ceramic material in implants f...$28.00
ICALEO 2013 Paper #303 (Combinatorial Laser-Assisted Development of Novel Ti-Ta Alloys for Biomedical Applications)
Combinatorial Laser-Assisted Development of Novel Ti-Ta Alloys for Biomedical Applications
Authors:
Amelia Almeida, Instituto Superior Tecnico, Universidade De Lisboa and Icems - Instituto De Ciencia E Engenharia De Materiais E Superficies; Lisbon Portugal
Martim Teixeira, Instituto Superior Tecnico, Universidade De Lisboa and Icems - Instituto De Ciencia E Engenharia De Materiais E Superficies; Lisbon Portugal
Carole Loable, Instituto Superior Tecnico, Universidade De Lisboa and Icems - Instituto De Ciencia E Engenharia De Materiais E Superficies; Lisbon Portugal
Odila Florencio, Universidade Federal De SãO Carlos; SãO Carlos Brazil
J.S. Fernandes, Instituto...$28.00
ICALEO 2013 Paper #301 (Marine Resources and Sub-Products Valorisation for Medical Applications by Laser Assisted Techniques)
Marine Resources and Sub-Products Valorisation for Medical Applications by Laser Assisted Techniques
Authors:
Mohamed Boutinguiza, University of Vigo; Vigo Spain
Rafael Comesana, University of Vigo; Vigo Spain
Jesus Del Val, University of Vigo; Vigo Spain
Felipe Arias-Gonzalez, University of Vigo; Vigo Spain
Joaquin Penide, University of Vigo; Vigo Spain
Felix Quintero, University of Vigo; Vigo Spain
Antonio Riveiro, University of Vigo; Vigo Spain
Fernando Lusquinos, University of Vigo; Vigo Spain
Juan Pou, University of Vigo; Vigo Spain
Presented at ICALEO 2013
In order to preserve the marin...$28.00
Pages
There is currently no content classified with this term.