ICALEO 2012 Paper #1501 (Narrow Gap Laser Welding of Thick Section Stainless Steel)
Narrow Gap Laser Welding of Thick Section Stainless Steel
Authors:
Ahmed S. Elmesalamy, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The Manchester Univ.; Manchester Great Britain
Lin Li, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The Manchester Univ.; Manchester Great Britain
John A. Francis, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The Manchester Univ.; Manchester Great Britain
Presented at ICALEO 2012
Laser welding of thick cross section stainless steel normally requires high power lasers. Typical weld penetration depth is 1-2 mm/...$28.00
ICALEO 2012 Paper #1407 (Position Welding of 960 MPa Ultra-High-Strength Steel)
Position Welding of 960 MPa Ultra-High-Strength Steel
Authors:
Jukka Siltanen, Rautaruukki Oyj; Hämeenlinna Finland
Sakari Tihinen, Ruukki Metals Oy; Raahe Finland
Presented at ICALEO 2012
High-strength and ultra high-strength steels are used more and more frequently in the engineering industry. The welding of high-strength steels requires lower heat input welding processes to achieve matching joints. Laser and laser-GMA hybrid welding processes are used for the welding of these kinds of steels. The Finnish steel maker Rautaruukki makes high and ultra-high strength steels under the trademark Optim. In earlier studies, the welding position for these steels has been a flat position ...$28.00
ICALEO 2012 Paper #1404 (Development and Application of the 10 kW Fiber Laser Welding System)
Development and Application of the 10 kW Fiber Laser Welding System
Authors:
Yosuke Yamazaki, Joining and Welding Research Institute, Osaka Univ.; Osaka Japan
Akikazu Kitagawa, Hitachi Zosen Corporation; Osaka Japan
Presented at ICALEO 2012
The authors have developed laser welding technologies for about 20 years. Our practical application has been started for thin stainless steel products in 1999. In this study, we developed high power laser welding system for thick plate products. A 10kW fiber laser is used for this system. By using this system, we can fabricate thick plate products whose thicknesses are 15mm max. We applied this laser welding system for some parts of chemical pla...$28.00
ICALEO 2012 Paper #1403 (Investigation of the Keyhole in Laser Welding of Different Joint Geometries by Means of X-Ray Videography - Invited Presentation - 40 Minutes)
Investigation of the Keyhole in Laser Welding of Different Joint Geometries by Means of X-Ray Videography - Invited Presentation - 40 Minutes
Authors:
Mikko Vänskä, Lappeenranta Univ. of Technology, Institut für Strahlwerkzeuge, Univ. of Stuttgart; Ostfildern-Nellingen Germany
Felix Abt, Institut für Strahlwerkzeuge, Univ. of Stuttgart; Stuttgart Germany
Rudolf Weber, Institut für Strahlwerkzeuge, Univ. of Stuttgart; Stuttgart Germany
Antti Salminen, Lappeenranta Univ. of Technology, Machine Technology Center Turku Ltd; Lappeenranta Finland
Thomas Graf, Institut für Strahlwerkzeuge, Univ. of Stuttgart; Stuttgart Germany
Presented at ICALEO 2012$28.00
ICALEO 2012 Paper #1402 (Zero-Gap Laser Welding of Zinc Coated Steels in a Lap Joint Configuration)
Zero-Gap Laser Welding of Zinc Coated Steels in a Lap Joint Configuration
Authors:
Shanglu Yang, China Science Lab, General Motors Global R&D; Shanghai Peoples Republic of China
Jeff Wang, China Science Lab, General Motors Global R&D; Shanghai Peoples Republic of China
Blair Carlson, Manufacturing Systems Lab, General Motors Global R&D; -
Jing Zhang, China Science Lab, General Motors Global R&D; -
Presented at ICALEO 2012
Zinc coated steels, which provide excellent corrosion resistance, are increasingly used in the automotive industry. Due to the lower boiling point of zinc (906°C) than the melting point of steel (over 1500°C), a highly-pressurized...$28.00
ICALEO 2012 Paper #1306 (Fundamental Investigations and a System Technology for Laser-Assisted Milling of Titanium Alloys)
Fundamental Investigations and a System Technology for Laser-Assisted Milling of Titanium Alloys
Authors:
Robert Wiedenmann, Technische Univ. Muenchen, Institute for Machine Tools and Industrial Management (iwb); Garching Germany
Michael Zaeh, Technische Univ. Muenchen, Institute for Machine Tools and Industrial Management (iwb); Garching Germany
Presented at ICALEO 2012
Conventional steel materials are more and more substituted for advanced materials like titanium alloys for lightweight constructions and high-performance components. Especially in aerospace applications this trend is very distinctive. The newest generation of aircrafts consists of up to 20 % titanium alloys. Compar...$28.00
ICALEO 2012 Paper #1304 (A Comparative Study of Laser, CMT, Laser-Pulse MIG Hybrid and Laser-CMT Hybrid Welded Aluminium Alloy)
A Comparative Study of Laser, CMT, Laser-Pulse MIG Hybrid and Laser-CMT Hybrid Welded Aluminium Alloy
Authors:
Chen Zhang, Wuhan National Laboratory for Optoelectronics, Huazhong Univ. of Science and Technology; Wuhan, Hubei Peoples Republic of China
Ming Gao, Wuhan National Laboratory for Optoelectronics, Huazhong Univ. of Science and Technology; Wuhan, Hubei Peoples Republic of China
Geng Li, Wuhan National Laboratory for Optoelectronics, Huazhong Univ. of Science and Technology; Wuhan, Hubei Peoples Republic of China
Xiaoyan Zeng, Wuhan National Laboratory for Optoelectronics, Huazhong Univ. of Science and Technology; Wuhan, Hubei Peoples Republic of China
Prese...$28.00
ICALEO 2012 Paper #1302 (Development and Experimental Analysis of Laser-Assisted Plasma Arc Welding)
Development and Experimental Analysis of Laser-Assisted Plasma Arc Welding
Authors:
Achim Mahrle, Institut für Oberflächen- und Fertigungstechnik IOF, Technische Univ. Dresden; Dresden Germany
Michael Schnick, Institut für Oberflächen- und Fertigungstechnik IOF, Technische Univ. Dresden; Dresden Germany
Sascha Rose, Institut für Oberflächen- und Fertigungstechnik IOF, Technische Univ. Dresden; Dresden Germany
Thomas Pinder, Institut für Oberflächen- und Fertigungstechnik IOF, Technische Univ. Dresden; Dresden Germany
Eckhard Beyer, Institut für Oberflächen- und Fertigungstechnik IOF, Technische Univ. Dresden, Fraunhofer IWS Dresden; Dresden Germany$28.00
ICALEO 2012 Paper #1301 (Laser Guided Double Tungsten Inert Gas Welding of Aluminium)
Laser Guided Double Tungsten Inert Gas Welding of Aluminium
Authors:
Alexander Barroi, Laser Zentrum Hannover e.V.; Hannover Germany
Ryan Knill, Laser Zentrum Hannover e.V.; -
Jörg Hermsdorf, Laser Zentrum Hannover e.V.; Hannover Germany
Stefan Kaierle, Laser Zentrum Hannover e.V.; Hannover Germany
Ludger Overmeyer, Laser Zentrum Hannover e.V.; -
Presented at ICALEO 2012
TIG welding is a common industrially established process. Its main advantage is the weld quality. The drawback is the low process speed which leads to high heat affects, irreversibly destroyed material properties and work piece distortion. To overcome these process limits...$28.00
ICALEO 2012 Paper #1206 (Laser Hardening of Gear Wheels)
Laser Hardening of Gear Wheels
Authors:
Stanislav Nemecek, MATEX PM; Pilsen Czech Republic
Tomas Muzik, MATEX PM; -
Michal Misek, MATEX PM; -
Presented at ICALEO 2012
Laser hardening achieves higher heating and quenching rates than other surface hardening methods. High heating rate minimizes the risk of degradation of the underlying material. Self-quenching is based on removing the heat from the surface into the part's core by conduction, instead of the conventional cooling by water spray. Gear wheels, which tend to exhibit numerous cracks upon induction hardening, do not crack during laser hardening. In addition to the above-mentioned principles, this paper explai...$28.00
Pages
There is currently no content classified with this term.