Exciting News—A New LIA Website Is Coming Soon!

Get ready for a fresh design, enhanced usability, and improved accessibility. Click here for a sneak peek!

  • ICALEO 2011 Paper #M206 (Parameter Study on Laser Welding of Nitinol Wire by Taguchi Method)

    Parameter Study on Laser Welding of Nitinol Wire by Taguchi Method
    Authors:
    C.W. Chan, The Hong Kong Polytechnic University; Hong Kong Hong Kong
    H.C. Man, The Hong Kong Polytechnic University; Hong Kong Hong Kong
    T.M. Yue, The Hong Kong Polytechnic University; Hong Kong Hong Kong
    Presented at ICALEO 2011

    A L27 Taguchi experiment was done to investigate the effect of laser power, welding time, laser mode (CW and two pulsed modes), focus position, and their possible interactions on the weld-bead aspect ratio of laser-welded NiTi wires by using a 100W fibre laser. The optimized parameter setting to produce the full penetrated weldment with minimum welding defects is succe...

    $28.00

  • ICALEO 2011 Paper #M205 (Welding Characteristics of Aluminum Alloy by Pulsed Nd:YAG Laser with Pre- and Post-Irradiation of Superposed Continuous Diode Laser)

    Welding Characteristics of Aluminum Alloy by Pulsed Nd:YAG Laser with Pre- and Post-Irradiation of Superposed Continuous Diode Laser
    Authors:
    Shin-ichi Nakashiba, Kataoka Corporation; Yokohama Japan
    Yasuhiro Okamoto, Okayama University; Okayama Japan
    Tomokazu Sakagawa, Kataoka Corporation; Yokohama Japan
    Kazuya Miura, Okayama University; Okayama Japan
    Akira Okada, Okayama University; Okayama Japan
    Yoshiyuki Uno, Okayama University; Okayama Japan
    Presented at ICALEO 2011

    Authors developed the high-performance micro-welding of aluminum alloy, in which the superposition of continuous diode laser of wavelength 808nm and pulsed Nd:YAG ...

    $28.00

  • ICALEO 2011 Paper #M203 (Prospects of Welding Foils with Solid State Laser for Lithium-Ion Batteries)

    Prospects of Welding Foils with Solid State Laser for Lithium-Ion Batteries
    Authors:
    Renald Schedewy, Fraunhofer Institute for Material and Beam Technology (IWS); Dresden Germany
    Eckhard Beyer, Fraunhofer Institute for Material and Beam Technology (IWS), University of Technology Dresden; Dresden Germany
    Berndt Brenner, Fraunhofer Institute for Material and Beam Technology (IWS); Dresden Germany
    Jens Standfuss, Fraunhofer Institute for Material and Beam Technology (IWS); Dresden Germany
    Presented at ICALEO 2011

    Lithium Ion batteries will become a key element in future E-mobility. In a layered pouch cell design the electrical contacts consists of conductive ...

    $28.00

  • ICALEO 2011 Paper #M202 (Flexible and Efficient Laser Remote Welding of Ultra-Thin Metal Foils)

    Flexible and Efficient Laser Remote Welding of Ultra-Thin Metal Foils
    Authors:
    Andreas Patschger, JENOPTIK Automatisierungstechnik GmbH; Jena Germany
    Matthias Hild, JENOPTIK Automatisierungstechnik GmbH; Jena Germany
    Jean Pierre Bergmann, University of Applied Science Jena; Ilmenau Germany
    Jens Bliedtner, University of Applied Science Jena; Jena Germany
    Presented at ICALEO 2011

    This paper discusses investigations regarding flexible and efficient strategies of laser remote welding of ultra-thin metal foils ( 50 µm) which are applied in area of electronics, packaging, sensor systems and construction. A single mode fiber laser was used equipped with a sca...

    $28.00

  • ICALEO 2011 Paper #M1311 (Photonics in Medicine - From Diagnostics to Training)

    Photonics in Medicine - From Diagnostics to Training
    Authors:
    Michael Schmidt, Bayerisches Laserzentrum Erlangen, Chair of Photonic Technologies, University of Erlangen-Nurnberg, Graduate School in Advanced Optical Technologies (SAOT), University of Erlangen-Nurnberg; Erlangen Germany
    Maik Zimmermann, Bayerisches Laserzentrum Erlangen, Graduate School in Advanced Optical Technologies (SAOT), University of Erlangen-Nurnberg; Erlangen Germany
    Martin Hohmann, Chair of Photonic Technologies, University of Erlangen-Nurnberg, Graduate School of Advanced Optical Technologies, University of Erlangen-Nurnberg; Erlangen Germany
    Jan Paulus, Chair of Photonic Technologies, University o...

    $28.00

  • ICALEO 2011 Paper #M1310 (Formation and Antibacterial Activities of Nanostructured TiO2 Thin Films by Sol-Gel/Laser-Induced Technique)

    Formation and Antibacterial Activities of Nanostructured TiO2 Thin Films by Sol-Gel/Laser-Induced Technique
    Authors:
    Yasir Joya, Corrosion and Protection Centre, School of Materials, The University of Manchester; Manchester Great Britain
    Tao Wang, School of Medicine, The University of Manchester; Manchester Great Britain
    Zhu Liu, Corrosion and Protection Centre, School of Materials, The University of Manchester; Manchester Great Britain
    Presented at ICALEO 2011

    A novel sol-gel/laser-induced technique (SGLIT) has been developed to generate nano-structured TiO2-based thin films. The TiO2 precursor loaded with Ce+2, W+6 and Ag+2 ions (Ce-TiO2, W-TiO2 and Ag-TiO2) were sep...

    $28.00

  • ICALEO 2011 Paper #M1307 (The Research of the Connection of Excimer Laser Zoom-Processing Condition to the PMMA Micro-Channel's Edge-Smoothness and Roughness)

    The Research of the Connection of Excimer Laser Zoom-Processing Condition to the PMMA Micro-Channel's Edge-Smoothness and Roughness
    Authors:
    Xie Zhengyang, Beijing University of Technology; Beijing Peoples Republic of China
    Chen Tao, Beijing University of Technology; Beijing Peoples Republic of China
    Liu Ning, Beijing University of Technology; Beijing Peoples Republic of China
    Shen Xuefei, Beijing University of Technology; Beijing Peoples Republic of China
    Presented at ICALEO 2011

    Excimer lasers can be applied to the micro-channel processing Polymethyl Methacrylate (PMMA) material. PMMA is known as a main material for the high polymer biochips and shows a ...

    $28.00

  • ICALEO 2011 Paper #M1306 (Effect of Excimer Laser Irradiation of Biodegradable Polymer on Its Chemical Bonding)

    Effect of Excimer Laser Irradiation of Biodegradable Polymer on Its Chemical Bonding
    Authors:
    Hongliang Wang, PRESENTER NOT AUTHOR; -
    Shan-Ting Hsu, Columbia University; New York NY USA
    Huade Tan, Columbia University; New York NY USA
    Y. Lawrence Yao, Columbia University; New York NY USA
    Presented at ICALEO 2011

    The biodegradable polymer such as poly(L-lactic acid) (PLLA) is promising in drug delivery applications because its chemical structure allows it to hydrolyze into non-toxic substances in the human body. In such applications, drugs are embedded in a polymer matrix and released at the rate at which it degrades. PLLA degradation rate of is a strong ...

    $28.00

  • ICALEO 2011 Paper #M1302 (Modulation of Osteoblast Cell Response Through Laser Surface Processing of Nylon 6,6)

    Modulation of Osteoblast Cell Response Through Laser Surface Processing of Nylon 6,6
    Authors:
    David Waugh, University of Lincoln; Lincoln Great Britain
    Jonathan Lawrence, University of Lincoln; Lincoln Great Britain
    Presented at ICALEO 2011

    With an ageing population demand on medical facilities is growing, especially for bio-implants. Therefore, there is a need for cheaper, more efficient implants. This paper details how CO2 and KrF excimer lasers can be employed to modulate osteoblast cell growth on nylon 6,6 in relation to laser-modified wettability characteristics. Through patterning the contact angle, θ, increased by up to 19°, indicating the presence of a mixed state wetting...

    $28.00

  • ICALEO 2011 Paper #M1301 (From Cw to Fs: Fiber Lasers in Medical Device Manufacturing)

    From Cw to Fs: Fiber Lasers in Medical Device Manufacturing
    Authors:
    Roland Mayerhofer, ROFIN-BAASEL Lasertech GmbH & Co. KG; Starnberg Germany
    Dieter Mairhoermann, ROFIN-BAASEL Lasertech GmbH & Co. KG; Starnberg Germany
    Michael Mueller, ROFIN-BAASEL Lasertech GmbH & Co. KG; Starnberg Germany
    Markus Roehner, ROFIN-BAASEL Lasertech GmbH & Co. KG; Starnberg Germany
    Stephan Geiger, ROFIN-BAASEL Lasertech GmbH & Co. KG; Starnberg Germany
    Ronald Holtz, LASAG AG; Thun Switzerland
    Christoph Ruttimann, LASAG AG; -
    Presented at ICALEO 2011

    Since decades, lasers are a well-established tool in development and production of medi...

    $28.00

Pages

There is currently no content classified with this term.