ICALEO 2011 Paper #M206 (Parameter Study on Laser Welding of Nitinol Wire by Taguchi Method)
Parameter Study on Laser Welding of Nitinol Wire by Taguchi Method
Authors:
C.W. Chan, The Hong Kong Polytechnic University; Hong Kong Hong Kong
H.C. Man, The Hong Kong Polytechnic University; Hong Kong Hong Kong
T.M. Yue, The Hong Kong Polytechnic University; Hong Kong Hong Kong
Presented at ICALEO 2011
A L27 Taguchi experiment was done to investigate the effect of laser power, welding time, laser mode (CW and two pulsed modes), focus position, and their possible interactions on the weld-bead aspect ratio of laser-welded NiTi wires by using a 100W fibre laser. The optimized parameter setting to produce the full penetrated weldment with minimum welding defects is succe...$28.00
ICALEO 2011 Paper #M205 (Welding Characteristics of Aluminum Alloy by Pulsed Nd:YAG Laser with Pre- and Post-Irradiation of Superposed Continuous Diode Laser)
Welding Characteristics of Aluminum Alloy by Pulsed Nd:YAG Laser with Pre- and Post-Irradiation of Superposed Continuous Diode Laser
Authors:
Shin-ichi Nakashiba, Kataoka Corporation; Yokohama Japan
Yasuhiro Okamoto, Okayama University; Okayama Japan
Tomokazu Sakagawa, Kataoka Corporation; Yokohama Japan
Kazuya Miura, Okayama University; Okayama Japan
Akira Okada, Okayama University; Okayama Japan
Yoshiyuki Uno, Okayama University; Okayama Japan
Presented at ICALEO 2011
Authors developed the high-performance micro-welding of aluminum alloy, in which the superposition of continuous diode laser of wavelength 808nm and pulsed Nd:YAG ...$28.00
ICALEO 2011 Paper #M203 (Prospects of Welding Foils with Solid State Laser for Lithium-Ion Batteries)
Prospects of Welding Foils with Solid State Laser for Lithium-Ion Batteries
Authors:
Renald Schedewy, Fraunhofer Institute for Material and Beam Technology (IWS); Dresden Germany
Eckhard Beyer, Fraunhofer Institute for Material and Beam Technology (IWS), University of Technology Dresden; Dresden Germany
Berndt Brenner, Fraunhofer Institute for Material and Beam Technology (IWS); Dresden Germany
Jens Standfuss, Fraunhofer Institute for Material and Beam Technology (IWS); Dresden Germany
Presented at ICALEO 2011
Lithium Ion batteries will become a key element in future E-mobility. In a layered pouch cell design the electrical contacts consists of conductive ...$28.00
ICALEO 2011 Paper #M202 (Flexible and Efficient Laser Remote Welding of Ultra-Thin Metal Foils)
Flexible and Efficient Laser Remote Welding of Ultra-Thin Metal Foils
Authors:
Andreas Patschger, JENOPTIK Automatisierungstechnik GmbH; Jena Germany
Matthias Hild, JENOPTIK Automatisierungstechnik GmbH; Jena Germany
Jean Pierre Bergmann, University of Applied Science Jena; Ilmenau Germany
Jens Bliedtner, University of Applied Science Jena; Jena Germany
Presented at ICALEO 2011
This paper discusses investigations regarding flexible and efficient strategies of laser remote welding of ultra-thin metal foils ( 50 µm) which are applied in area of electronics, packaging, sensor systems and construction. A single mode fiber laser was used equipped with a sca...$28.00
ICALEO 2011 Paper #M1311 (Photonics in Medicine - From Diagnostics to Training)
Photonics in Medicine - From Diagnostics to Training
Authors:
Michael Schmidt, Bayerisches Laserzentrum Erlangen, Chair of Photonic Technologies, University of Erlangen-Nurnberg, Graduate School in Advanced Optical Technologies (SAOT), University of Erlangen-Nurnberg; Erlangen Germany
Maik Zimmermann, Bayerisches Laserzentrum Erlangen, Graduate School in Advanced Optical Technologies (SAOT), University of Erlangen-Nurnberg; Erlangen Germany
Martin Hohmann, Chair of Photonic Technologies, University of Erlangen-Nurnberg, Graduate School of Advanced Optical Technologies, University of Erlangen-Nurnberg; Erlangen Germany
Jan Paulus, Chair of Photonic Technologies, University o...$28.00
ICALEO 2011 Paper #M1310 (Formation and Antibacterial Activities of Nanostructured TiO2 Thin Films by Sol-Gel/Laser-Induced Technique)
Formation and Antibacterial Activities of Nanostructured TiO2 Thin Films by Sol-Gel/Laser-Induced Technique
Authors:
Yasir Joya, Corrosion and Protection Centre, School of Materials, The University of Manchester; Manchester Great Britain
Tao Wang, School of Medicine, The University of Manchester; Manchester Great Britain
Zhu Liu, Corrosion and Protection Centre, School of Materials, The University of Manchester; Manchester Great Britain
Presented at ICALEO 2011
A novel sol-gel/laser-induced technique (SGLIT) has been developed to generate nano-structured TiO2-based thin films. The TiO2 precursor loaded with Ce+2, W+6 and Ag+2 ions (Ce-TiO2, W-TiO2 and Ag-TiO2) were sep...$28.00
ICALEO 2011 Paper #M1307 (The Research of the Connection of Excimer Laser Zoom-Processing Condition to the PMMA Micro-Channel's Edge-Smoothness and Roughness)
The Research of the Connection of Excimer Laser Zoom-Processing Condition to the PMMA Micro-Channel's Edge-Smoothness and Roughness
Authors:
Xie Zhengyang, Beijing University of Technology; Beijing Peoples Republic of China
Chen Tao, Beijing University of Technology; Beijing Peoples Republic of China
Liu Ning, Beijing University of Technology; Beijing Peoples Republic of China
Shen Xuefei, Beijing University of Technology; Beijing Peoples Republic of China
Presented at ICALEO 2011
Excimer lasers can be applied to the micro-channel processing Polymethyl Methacrylate (PMMA) material. PMMA is known as a main material for the high polymer biochips and shows a ...$28.00
ICALEO 2011 Paper #M1306 (Effect of Excimer Laser Irradiation of Biodegradable Polymer on Its Chemical Bonding)
Effect of Excimer Laser Irradiation of Biodegradable Polymer on Its Chemical Bonding
Authors:
Hongliang Wang, PRESENTER NOT AUTHOR; -
Shan-Ting Hsu, Columbia University; New York NY USA
Huade Tan, Columbia University; New York NY USA
Y. Lawrence Yao, Columbia University; New York NY USA
Presented at ICALEO 2011
The biodegradable polymer such as poly(L-lactic acid) (PLLA) is promising in drug delivery applications because its chemical structure allows it to hydrolyze into non-toxic substances in the human body. In such applications, drugs are embedded in a polymer matrix and released at the rate at which it degrades. PLLA degradation rate of is a strong ...$28.00
ICALEO 2011 Paper #M1302 (Modulation of Osteoblast Cell Response Through Laser Surface Processing of Nylon 6,6)
Modulation of Osteoblast Cell Response Through Laser Surface Processing of Nylon 6,6
Authors:
David Waugh, University of Lincoln; Lincoln Great Britain
Jonathan Lawrence, University of Lincoln; Lincoln Great Britain
Presented at ICALEO 2011
With an ageing population demand on medical facilities is growing, especially for bio-implants. Therefore, there is a need for cheaper, more efficient implants. This paper details how CO2 and KrF excimer lasers can be employed to modulate osteoblast cell growth on nylon 6,6 in relation to laser-modified wettability characteristics. Through patterning the contact angle, θ, increased by up to 19°, indicating the presence of a mixed state wetting...$28.00
ICALEO 2011 Paper #M1301 (From Cw to Fs: Fiber Lasers in Medical Device Manufacturing)
From Cw to Fs: Fiber Lasers in Medical Device Manufacturing
Authors:
Roland Mayerhofer, ROFIN-BAASEL Lasertech GmbH & Co. KG; Starnberg Germany
Dieter Mairhoermann, ROFIN-BAASEL Lasertech GmbH & Co. KG; Starnberg Germany
Michael Mueller, ROFIN-BAASEL Lasertech GmbH & Co. KG; Starnberg Germany
Markus Roehner, ROFIN-BAASEL Lasertech GmbH & Co. KG; Starnberg Germany
Stephan Geiger, ROFIN-BAASEL Lasertech GmbH & Co. KG; Starnberg Germany
Ronald Holtz, LASAG AG; Thun Switzerland
Christoph Ruttimann, LASAG AG; -
Presented at ICALEO 2011
Since decades, lasers are a well-established tool in development and production of medi...$28.00
Pages
There is currently no content classified with this term.