ICALEO 2012 Paper #P143 (Preliminary Study of Laser Deep Machining)
Preliminary Study of Laser Deep Machining
Authors:
Emilie Le Guen, I2M, Département TREFLE, Esplanade des Arts Et Metiers, PIMM, Arts et Metiers Paristech, EDF R&D Departement Mri, Site de Chatou; Gradignan France
Laurent Berthe, PIMM, Arts et Metiers ParisTech; Paris France
Leila Guenad, EDF R&D Departement Mri, Site de Chatou; Chatou France
Nicolas Jardin, EDF R&D Departement Mri, Site de Chatou; Chatou France
Presented at ICALEO 2012
Nowadays, laser machining of metals has some
advantages over more traditional processes. For
example, there is greater flexibility of use and no
mechanical contact with the surface. In micromachining,
shorter pulses re...$28.00
ICALEO 2012 Paper #P135 (Incorporation of CNT-Yarns into Metals by Laser Melting of Powder)
Incorporation of CNT-Yarns into Metals by Laser Melting of Powder
Authors:
Alexander Kaplan, Luleå Univ. of Technology; Lulea Sweden
Alexander Soldatov, Luleå Univ. of Technology; Lulea Sweden
Maxime Noel, Luleå Univ. of Technology; -
Peter Norman, Luleå Univ. of Technology, The Swedish Welding Commission; Stockholm Sweden
Ingemar Eriksson, Luleå Univ. of Technology; -
John Powell, Luleå Univ. of Technology, Laser Expertise Ltd.; Nottingham Great Britain
Shaoli Fang, Univ. of Texas at Dallas; Dallas TX USA
Ray Baughman, Univ. of Texas at Dallas; Dallas TX USA
Presented at ICALEO 2012
Carbon Nano...$28.00
ICALEO 2012 Paper #P133 (Analysis and Simulation of the Effects of the Melt Pool Flow During Laser Deposition of a Multiphase Material)
Analysis and Simulation of the Effects of the Melt Pool Flow During Laser Deposition of a Multiphase Material
Authors:
Mushtaq Khan, Manufacturing and Management Group, School of Mechanical, Aerospace and Civil Engineering, The Univ. of Manchester; Manchester Great Britain
Michael Vogel, Manufacturing and Management Group, School of Mechanical, Aerospace and Civil Engineering, The Univ. of Manchester; Manchester Great Britain
Juansethi Ibarra-Medina, Manufacturing and Management Group, School of Mechanical, Aerospace and Civil Engineering, the University of Manchester; Manchester Great Britain
Andrew J Pinkerton, Manufacturing and Management Group, School of Mechanical, Ae...$28.00
ICALEO 2012 Paper #P131 (Analysis of Process Parameters on Melt Pool Stability in Powder Bed Laser Melting)
Analysis of Process Parameters on Melt Pool Stability in Powder Bed Laser Melting
Authors:
Pascal Aubry, CEA/DEN/DANS/DPC/SEARS/LISL, Arts et Métiers ParisTech; PARIS France
Clara Salvetti, CEA/DEN/DANS/DPC/SEARS/LISL; -
Presented at ICALEO 2012
In this article, we propose to continue our investigation on the analysis of the powder bed laser melting process for the direct manufacturing. First, we describe the powder bed laser melting process. If the process is now industrially used, the fusion of the powder and its influence on the stability of the melt pool is not clearly understood. The objective of the study is to understand how the powder is fused and how a change in process...$28.00
ICALEO 2012 Paper #P130 (Laser Assisted Manufacturing of Porous Metallic Structures)
Laser Assisted Manufacturing of Porous Metallic Structures
Authors:
Jesus del Val, Applied Physics Department, Univ. of Vigo; Vigo Spain
Antonio Riveiro, Centro Univ. de la Defensa; Marin Spain
Rafael Comesaña, Applied Physics Department, Univ. of Vigo; Vigo Spain
Fernando Lusquiños, Applied Physics Department, Univ. of Vigo; Vigo Spain
Mohamed Boutinguiza, Applied Physics Department, Univ. of Vigo; Vigo Spain
Felix Quintero, Applied Physics Department, Univ. of Vigo; Vigo Spain
Juan Pou, Applied Physics Department, Univ. of Vigo; Vigo Spain
Presented at ICALEO 2012
The highly demand of porous metallic materials in ...$28.00
ICALEO 2012 Paper #P128 (Thermal and Mechanical Modeling of Single Metallic Powder Layer for Laser Micro Sintering)
Thermal and Mechanical Modeling of Single Metallic Powder Layer for Laser Micro Sintering
Authors:
Jie Yin, Division of Laser Science and Technology, Wuhan National Laboratory for Optoelectronics, Institute of Optoelectronics Science and Engineering, Huazhong Univ. of Science and Technology; Wuhan Peoples Republic of China
Haihong Zhu, Division of Laser Science and Technology, Wuhan National Laboratory for Optoelectronics, Institute of Optoelectronics Science and Engineering, Huazhong Univ. of Science and Technology; Wuhan Peoples Republic of China
Linda Ke, Division of Laser Science and Technology, Wuhan National Laboratory for Optoelectronics, Institute of Optoelectronics Science and ...$28.00
ICALEO 2012 Paper #P126 (Corrosion Resistant Laser Coatings for Hydraulic Piston Rods)
Corrosion Resistant Laser Coatings for Hydraulic Piston Rods
Authors:
Jari Tuominen, Department of Materials Science, Tampere Univ. of Technology; Tampere Finland
Jonne Näkki, Department of Materials Science, Tampere Univ. of Technology, Technology Centre Ketek Ltd.; Tampere Finland
Juha Junkala, Technology Centre Ketek Ltd.; Kokkola Finland
Juha Miettinen, Department of Mechanics and Design, Tampere Univ. of Technology; Tampere Finland
Tuomo Peltola, Technology Centre Ketek Ltd.; Kokkola Finland
Petri Vuoristo, Department of Materials Science, Tampere Univ. of Technology; Tampere Finland
Presented at ICALEO 2012
Hydraulic piston...$28.00
ICALEO 2012 Paper #P124 (Laser Cladding with Coaxial Wire Feeding)
Laser Cladding with Coaxial Wire Feeding
Authors:
Pajukoski Henri, Tampere Univ. of Technology, Department of Materials Science; Tampere Finland
Näkki Jonne, Tampere Univ. of Technology, Department of Materials Science; Tampere Finland
Thieme Sebastian, Fraunhofer IWS, Material and Beam Technology; Dresden Germany
Tuominen Jari, Tampere Univ. of Technology, Department of Materials Science; Tampere Finland
Nowotny Steffen, Fraunhofer IWS, Material and Beam Technology; Dresden Germany
Vuoristo Petri, Tampere Univ. of Technology , Department of Materials Science; Tampere Finland
Presented at ICALEO 2012
In the last years coaxial las...$28.00
ICALEO 2012 Paper #P120 (Effects of Laser-Peening Parameters on Plastic Deformation of SUS316L)
Effects of Laser-Peening Parameters on Plastic Deformation of SUS316L
Authors:
Kohei Mizuta, Program in Electronic Engineering, Interdisciplinary Graduate Faculty of Science and Engineering, Kinki Univ.; Osaka Japan
Miho Tsuyama, Program in Electronic Engineering, Interdisciplinary Graduate Faculty of Science and Engineering, Kinki Univ.; -
Makoto Takahaski, Joining and Welding Research Institute, Osaka Univ.; -
Toshiya Shibayanagi, Program in Materials Science and Engineering, Faculty of Engineering, Toyama Univ.; -
Hitoshi Nakano, Program in Electronic Engineering, Interdisciplinary Graduate Faculty of Science and Engineering, Kinki Univ.; -
...$28.00
ICALEO 2012 Paper #P105 (Diode-Pumped Nanosecond Nd:Yag Laser Micromachining of Ti-3Al-2.5V Tubes for Fatigue Life Study)
Diode-Pumped Nanosecond Nd:Yag Laser Micromachining of Ti-3Al-2.5V Tubes for Fatigue Life Study
Authors:
Yaomin Lin, Alfred E. Mann Foundation for Scientific Research; Santa Clarita CA USA
Mool Gupta, Department of Electrical & Computer Engineering, Univ. of Virginia; Charlottesville VA USA
Presented at ICALEO 2012
Due to its superior properties such as high strength to weight ratio, great creep and corrosion resistance, amenable to cold working, etc., Ti-3Al-2.5V is widely used in making seamless tubing in hydraulic systems in aerospace applications. Defects can develop on the surface of the tube during service. Under periodic loading of hydraulic impulse pressure, micro-crack can...$28.00
Pages
There is currently no content classified with this term.