Exciting News—A New LIA Website Is Coming Soon!

Get ready for a fresh design, enhanced usability, and improved accessibility. Click here for a sneak peek!

  • PICALO 2008 Paper #1106 (Process Parameters Study of Closed-Loop Laser Rapid Forming)

    Process Parameters Study of Closed-Loop Laser Rapid Forming
    Authors:
    Jun Yu, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University; Xi\'An Peoples Republic of China
    Hua Tan, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University; Xi\\'An Peoples Republic of China
    Jing Chen, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University; Xi\\'An Peoples Republic of China
    Xin Lin, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University; Xi\'An Peoples Republic of China
    Weidong Huang, State Key Laboratory of Solidification Processing, Nor...

    $28.00

  • PICALO 2008 Paper #1104 (Topographic Analysis of Holes Drilled by Pulsed Nd:Yag Laser on Dd6 Single-Crystal Superalloy)

    Topographic Analysis of Holes Drilled by Pulsed Nd:Yag Laser on Dd6 Single-Crystal Superalloy
    Authors:
    Chen Changjun, Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Laser Processing Research Center; Wuhan Peoples Republic of China
    Zhang Min, Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Laser Processing Research Center; Wuhan Peoples Republic of China
    Zhang Shichang, Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Laser Processing Research Center; Wuhan Peoples Republic of China
    Chang Qingming, Key Laboratory for Ferrous Metallurgy and Resources U...

    $28.00

  • PICALO 2008 Paper #1102 (A Statistical Model for Research on the Focal Position Effect on the Taper of Laser Drilling)

    A Statistical Model for Research on the Focal Position Effect on the Taper of Laser Drilling
    Authors:
    Yinzhou Yan, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Lingfei Ji, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Yijian Jiang, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Yong Bao, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Presented at PICALO 2008

    The relationships between focal position and diameter or taper of holes drilled by CO2 ...

    $28.00

  • PICALO 2008 Paper #109 (The Development of Laser-Chemical Combined Large Scale Etching on Difficult-To-Cut Materials)

    The Development of Laser-Chemical Combined Large Scale Etching on Difficult-To-Cut Materials
    Authors:
    Yuan Genfu, Anhui Institute of Architecture and Industry; Hefei Peoples Republic of China
    Yansheng Yao, Anhui Institute of Architecture and Industry; Hefei Peoples Republic of China
    Shaofeng Zhu, Anhui Institute of Architecture and Industry; Hefei Peoples Republic of China
    Yuanlong Chen, Hefei University of Technology ; Hefei Peoples Republic of China
    Bichao Xu, Anhui Institute of Architecture and Industry; Hefei Peoples Republic of China
    Huaqi Liang, Anhui Institute of Architecture and Industry; Hefei Peoples Republic of China
    Presented a...

    $28.00

  • PICALO 2008 Paper #108 (A Novel Technology of the Laser Cleaving on Glass Sheets with Multiple Laser Beams)

    A Novel Technology of the Laser Cleaving on Glass Sheets with Multiple Laser Beams
    Authors:
    Y. L. Kuo, National Cheng Kung University; Tainan Taiwan
    Jehnming Lin, National Cheng Kung University; Tainan Taiwan
    T. C. Chen, Geniray Technology Corporation; Taipei Taiwan
    Presented at PICALO 2008

    A multiple laser system consisting of CO2 line-shaped and Nd-YAG pulsed lasers was applied to cleave a soda-lime glass substrate in this study. Due to a high absorption of the Nd-YAG laser at a high temperature state of the soda-lime glass preheated by the CO2 line-shaped laser to generate a mixture fracture mode on the glass substrate, the stress distribution on the glass substrate...

    $28.00

  • PICALO 2008 Paper #107 (Effect of Laser Beam on Machining of Titanium Alloys)

    Effect of Laser Beam on Machining of Titanium Alloys
    Authors:
    Shoujin Sun, Swinburne University of Technology; Melbourne Australia
    James Harris, Iris, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology, Cast Cooperative Research Centre, Australia ; Melbourne Australia
    Yvonne Durandet, Iris, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology, Hawthorn, Victoria, Australia ; Melbourne Australia
    Milan Brandt, Iris, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology, Hawthorn, Victoria, Australia ; Melbourne Australia
    Presented at PICALO 2008

    Laser assisted machinin...

    $28.00

  • PICALO 2008 Paper #106 (High Precision Machining and Cutting of Si using a Single Mode (Invited Paper))

    High Precision Machining and Cutting of Si using a Single Mode (Invited Paper)
    Authors:
    William O'Neill, University of Cambridge; Cambridge Great Britain
    K. Li, University of Cambridge; Cambridge Great Britain
    Tony Hoult, Spi Lasers Inc; Santa Clara CA USA
    Presented at PICALO 2008

    The application of lasers in the microelectronics sector has grown steadily over the past 10 years as DPSS lasers have increased power output and high levels of reliability. The readiness of such systems to operate at various output wavelengths such as 355nm has further enabled a greater range of processing operations for Si based microsystems. Recent advances in Yb doped fiber lasers with ...

    $28.00

  • PICALO 2008 Paper #105 (Laser Machining in Ceramics Manufacture (Invited Paper))

    Laser Machining in Ceramics Manufacture (Invited Paper)
    Authors:
    Duncan Hand, Heriot-Watt University; Edinburgh Great Britain
    Fraser Dear, Heriot-Watt University; Edinburgh Great Britain
    Jonathan Parry, Heriot-Watt University; Edinburgh Great Britain
    Jonathan Shephard, Heriot-Watt University; Edinburgh Great Britain
    Krzysztof Nowak, Heriot-Watt University; Edinburgh Great Britain
    Denis Hall, Heriot-Watt University; Edinburgh Great Britain
    Howard Baker, Heriot-Watt University; Edinburgh Great Britain
    Presented at PICALO 2008

    Ceramic materials are increasingly used across a range of industrial and medical applications, ...

    $28.00

  • PICALO 2008 Paper #104 (Study on the Machining Process of a New Laser Crack-Free Cutting Technique for Ceramics)

    Study on the Machining Process of a New Laser Crack-Free Cutting Technique for Ceramics
    Authors:
    Lingfei Ji, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Yinzhou Yan, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Yong Bao, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Yijian Jiang, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Presented at PICALO 2008

    Research on laser crack-free cutting of ceramics, especially for the thicker workpieces, has ...

    $28.00

  • PICALO 2008 Paper #103 (The Studies of Laser Oxygen Thick Section Cutting using Disk Laser)

    The Studies of Laser Oxygen Thick Section Cutting using Disk Laser
    Authors:
    Tao Zhang, Centre for Industrial Photonics; Cambridge Great Britain
    Martin Sparkes, Centre for Industrial Photonics; Cambridge Great Britain
    Markus Gross, Centre for Industrial Photonics; Cambridge Great Britain
    William O\'Neill, Centre for Industrial Photonics; Cambridge Great Britain
    Presented at PICALO 2008

    Laser Oxygen Thick Section Cutting (LOTSC), a cutting process which utilises the full performance of a supersonic oxygen gas jet for cutting (typically) 30-60 mm mild steel plate, has previously been examined primarily using the CO2 laser. This paper looks at some of the con...

    $28.00

Pages

There is currently no content classified with this term.