ICALEO 2007 Paper #M805 (Monitoring of the Micro-Drilling Process by Detection of Laser-Induced Shock Waves in Air)
Monitoring of the Micro-Drilling Process by Detection of Laser-Induced Shock Waves in Air
Authors:
Andreas Michalowski, Institut für Strahlwerkzeuge; Stuttgart Germany
Dmitrij Walter, Forschungsgesellschaft für Strahlwerkzeuge mbH; Stuttgart Germany
Friedrich Dausinger, Forschungsgesellschaft für Strahlwerkzeuge; Stuttgart Germany
Roland Gauch, Forschungsgesellschaft für Strahlwerkzeuge; Stuttgart Germany
Presented at ICALEO 2007
This work presents a method for the determination of different stages of the micro-drilling process including the measurement of the hole depth and the detection of the completion of desired channel morphology. The experiment...$28.00
ICALEO 2007 Paper #M804 (Automatic Calibration of a Scanner-Based Laser Welding System)
Automatic Calibration of a Scanner-Based Laser Welding System
Authors:
André Stollenwerk, Institute of Imaging and Computer Vision, RWTH Aachen University; Aachen Germany
Nicolaj Stache, Institute of Imaging and Computer Vision, RWTH Aachen University; Aachen Germany
Alexander Olowinsky, Fraunhofer Institute for Laser Technology; Aachen Germany
Jens Gedicke, Fraunhofer Institute for Laser Technology; Aachen Germany
Achim Knepper, Institute of Imaging and Computer Vision, Rwth Aachen University; Aachen Germany
Til Aach, Institute of Imaging and Computer Vision, RWTH Aachen University; Aachen Germany
Presented at ICALEO 2007
In pre...$28.00
ICALEO 2007 Paper #M803 (Microstructural Characterization of Pulsed Laser-deposited Hydroxyapatite Thin Films on Ti-6Al-4V)
Microstructural Characterization of Pulsed Laser-deposited Hydroxyapatite Thin Films on Ti-6Al-4V
Authors:
Guru Dinda, CLAIM, University of Michigan; Ann Arbor MI USA
Joonghan Shin, CLAIM, University of Michigan; Ann Arbor MI USA
Jyoti Mazumder, CLAIM, University of Michigan; Ann Arbor MI USA
Presented at ICALEO 2007
Hydroxyapatite (HA), Ca10(PO4)6(OH)2, is the main mineral component of natural bone (~ 70%), shows the most desirable bone response among the bioactive materials. In the present study, HA coatings of approximately 2-3 µm thickness were deposited on Ti-6Al-4V substrate by KrF excimer laser (λ=248 nm, pulse repetition rate = 10Hz, pulse duration = 20 ns, L...$28.00
ICALEO 2007 Paper #M802 (Deposition of the Ni-based Superalloy Films by Pulsed Excimer Laser)
Deposition of the Ni-based Superalloy Films by Pulsed Excimer Laser
Authors:
Joonghan Shin, CLAIM, University of Michigan; Ann Arbor MI USA
Jyoti Mazumder, CLAIM, University of Michigan; Ann Arbor MI USA
Presented at ICALEO 2007
Ni-based superalloy films were deposited on single crystal Ni-based superalloy substrates from the target with congruent alloy components by pulsed laser deposition (PLD) technique. In this study, substrate temperature, pulse energy, pulse repetition rate and deposition time were selected as independent variables to investigate the effect of each process parameter on epitaxial growth behaviour of the Ni superalloy films. Microstructure and growth behaviour ...$28.00
ICALEO 2007 Paper #M801 (Laser-Assisted Diamond Deposition on Copper Substrated using Combustion-Flame Method)
Laser-Assisted Diamond Deposition on Copper Substrated using Combustion-Flame Method
Authors:
H. Ling, University of Nebraska - Lincoln; Lincoln NE USA
M. Zhao, University of Nebraska - Lincoln; Lincoln NE USA
Yaoxuan Han, University of Nebraska - Lincoln; Lincoln NE USA
Yongfeng Lu, University of Nebraska - Lincoln; Lincoln NE USA
J. Sun, University of Nebraska - Lincoln; Lincoln NE USA
T. Gebre, University of Nebraska - Lincoln; Lincoln NE USA
Presented at ICALEO 2007
Diamond was deposited on metal substrates (Cu, Al, and Fe) in open atmosphere using a C2H2/O2 combustion flame. A continuous CO2 laser was used to irradiate the su...$28.00
ICALEO 2007 Paper #M705 (Benefits of Non-Polar Assist Liquids As Alternatives to Water Assist in the Laser Machining of Silicon)
Benefits of Non-Polar Assist Liquids As Alternatives to Water Assist in the Laser Machining of Silicon
Authors:
Helen Howard, National Centre for Laser Applications, Nui; Galway Ireland
Alan Conneely, National Centre for Laser Applications, Nui; Galway Ireland
Gerard O'Connor, National Centre for Laser Applications, NUI; Galway Ireland
Rory Jordan, Hewlett Packard; Dublin Ireland
Thomas Glynn, National Centre for Laser Applications, Nui; Galway Ireland
Presented at ICALEO 2007
The use of a water assist has been shown to improve machining efficiency and feature cleanliness for the laser micro machining of features in silicon. However, the wate...$28.00
ICALEO 2007 Paper #M704 (Recent Advances in Precision Machining of Various Materials with the Laser MicroJet®)
Recent Advances in Precision Machining of Various Materials with the Laser MicroJet®
Authors:
Bernold Richerzhagen, Synova SA; Ecublens Switzerland
Tuan Anh Mai, Synova SA; Ecublens Switzerland
John Keith Stay, Synova SA; Ecublens Switzerland
Presented at ICALEO 2007
Laser micromachining employs ultra short pulsed or UV lasers to overcome problems of thermal damage and debris formation. However, the main obstacles in using these types of laser are notably, low ablation rates and high running costs. This paper describes some recent advances made in the precision machining of industrial materials, using the unique capabilities of the Synova Laser Microjet® technology. ...$28.00
ICALEO 2007 Paper #M702 (Laser Micromachining and Energy Field Manufacturing)
Laser Micromachining and Energy Field Manufacturing
Authors:
Wenwu Zhang, GE Global Research; Schenectady NY USA
Jeffrey Shaw, GE Global Research; Schenectady NY USA
Andrew Trimmer, GE Global Research; Schenectady NY USA
Z. Jay Cao, GE Global Research; Schenectady NY USA
Magdi Azer, GE Global Research; Schenectady NY USA
Presented at ICALEO 2007
Micro/nano material processing has become the cornerstone technology for the production of many modern products, and the unique features of laser energymake laser one of the most powerful tools for micro/nano manufacturing. Laser micromachining is flexible and can replicate features with high accuracy...$28.00
ICALEO 2007 Paper #M701 (Multi-Beam Parallel Processing and Chemical Finishing of Silicon for Microcavities in Ink-Jet Printer Heads (Invited Paper - 40 Minute Presentation))
Multi-Beam Parallel Processing and Chemical Finishing of Silicon for Microcavities in Ink-Jet Printer Heads (Invited Paper - 40 Minute Presentation)
Authors:
Jun Amako, Seiko Epson Corporation; Japan
Presented at ICALEO 2007
We demonstrate a laser-based process for manufacturing of microcavities in inkjet printer heads. It is a kind of hybrid process in which laser and non-laser technology is effectively coupled while incorporating multi-beam processing scheme for increased productivity. Improvement in printing quality and speed on inkjet printers requires reduction in cross talk between ink cavities. To this end, cavities can be better produced with a high aspect ratio on thick silicon. A si...$28.00
ICALEO 2007 Paper #M607 (The Micro-Welding Ability of 100W High Brightness Fibre Laser on 316L Stainless Steel)
The Micro-Welding Ability of 100W High Brightness Fibre Laser on 316L Stainless Steel
Authors:
C J Kong, Welding Engineering and Metal Science Centre, School of Applied Sciences, Cranfi; Bedfordshire Great Britain
S. Williams, Welding Engineering and Metal Science Centre, Cranfield University; Bedfordshire Great Britain
G. Lopes, Welding Engineering and Metal Science Centre, Cranfield University; Bedforshire Great Britain
P. Colegrove, Welding Engineering and Metal Science Centre, Cranfield University; Bedfordshire Great Britain
Presented at ICALEO 2007
Fibre lasers are an attractive option for laser micro-welding applications because of their high beam q...$28.00
Pages
There is currently no content classified with this term.