Exciting News—A New LIA Website Is Coming Soon!

Get ready for a fresh design, enhanced usability, and improved accessibility. Click here for a sneak peek!

  • ICALEO 2012 Paper #507 (Recent Developments in High Power Laser Cladding Techniques)

    Recent Developments in High Power Laser Cladding Techniques
    Authors:
    Jari Tuominen, Tampere Univ. of Technology, Department of Materials Science; Tampere Finland
    Jonne Näkki, Tampere Univ. of Technology, Department of Materials Science, Technology Centre Ketek Ltd; Tampere Finland
    Henri Pajukoski, Tampere Univ. of Technology, Department of Materials Science; Tampere Finland
    Tuomo Peltola, Technology Centre Ketek Ltd.; Kokkola Finland
    Petri Vuoristo, Tampere Univ. of Technology, Department of Materials Science; Tampere Finland
    Presented at ICALEO 2012

    Industrial laser cladding is typically done with 3-6kW continuous wave gas and solid state la...

    $28.00

  • ICALEO 2012 Paper #505 (A Comparison of Hot Cracking Sensibility of Some Alloy 625 Powders on Laser Cladding)

    A Comparison of Hot Cracking Sensibility of Some Alloy 625 Powders on Laser Cladding
    Authors:
    Jonne Näkki, Department of Materials Science, Tampere Univ. of Technology, Technology Centre Ketek Ltd; Kokkola Finland
    Jari Tuominen, Department of Materials Science, Tampere Univ. of Technology; -
    Petri Vuoristo, Department of Materials Science, Tampere Univ. of Technology; -
    Presented at ICALEO 2012

    Some properties of laser claddings made with several
    commercially available alloy 625 powders were
    investigated. Nickel based alloy 625, generally
    known also as Inconel 625, is widely used also on
    laser claddings due to its good corrosion properties in
    various environm...

    $28.00

  • ICALEO 2012 Paper #504 (Calculating the Stress of Multi-Track Formations in Induction-Assisted Laser Cladding)

    Calculating the Stress of Multi-Track Formations in Induction-Assisted Laser Cladding
    Authors:
    Frank Brueckner, Fraunhofer IWS Dresden; Dresden Germany
    Dietrich Lepski, Fraunhofer IWS Dresden; Dresden Germany
    Steffen Nowotny, Fraunhofer IWS Dresden; Dresden Germany
    Christoph Leyens, Fraunhofer IWS Dresden, Technische Univ. Dresden; Dresden Germany
    Eckhard Beyer, Fraunhofer IWS Dresden, Technische Univ. Dresden; Dresden Germany
    Presented at ICALEO 2012

    In laser cladding weld bead tracks, which are often made of wear and corrosion resistant materials, are strongly joined to the subjacent work piece forming surfaces as well as complex volume buil...

    $28.00

  • ICALEO 2012 Paper #503 (Comparison of Metal Matrix Nanocomposite and Microcomposite Layers on AISI H13 Tool Steel Surface by Addition of TiC Nanoparticles and Microparticles by Laser Cladding)

    Comparison of Metal Matrix Nanocomposite and Microcomposite Layers on AISI H13 Tool Steel Surface by Addition of TiC Nanoparticles and Microparticles by Laser Cladding
    Authors:
    Vicente Rouco, Technology Centre AIMEN; PorriñO Spain
    Mª ngeles Montealegre, Technology Centre AIMEN; Porriño Spain
    Pilar Rey, Technology Centre AIMEN; PorriñO Spain
    Gemma Castro, Technology Centre AIMEN; PorriñO Spain
    Marcos González, Technology Centre AIMEN; PorriñO Spain
    Jorge L. Arias, Technology Centre AIMEN; Porriño Spain
    Presented at ICALEO 2012

    There is a need in different industry sectors (automotive, aeronautics, and tooling industries)...

    $28.00

  • ICALEO 2012 Paper #501 (A Study of the Effect of Angle of Beam Incidence on Ytterbium Fiber Laser Cladding of Alloy 625)

    A Study of the Effect of Angle of Beam Incidence on Ytterbium Fiber Laser Cladding of Alloy 625
    Authors:
    Gerald Bruck, Siemens Energy, Inc.; Orlando FL USA
    Brandon Shinn, Siemens Energy, Inc.; Houston TX USA
    Ahmed Kamel, Siemens Energy, Inc.; Orlando FL USA
    Presented at ICALEO 2012

    An investigation is described that studies the effect of angle of beam incidence using ytterbium fiber laser cladding of alloy 625 (UNS N06625) on matching substrate. The trials include single pass without powder feeding and single pass, 3 pass upslope and 3 pass downslope with powder feeding. Power is held constant in initial single pass trials and then adjusted to maintain constant power d...

    $28.00

  • ICALEO 2012 Paper #410 (Study of the Behaviour of Carbon-Fiber-Reinforced-Polymer Composite Using Shock Produced by Laser)

    Study of the Behaviour of Carbon-Fiber-Reinforced-Polymer Composite Using Shock Produced by Laser
    Authors:
    Laurent Berthe, Laboratoire Procédés et Ingénièrie en Mécanique et Matériaux, Unité mixte CNRS/Arts et Métiers ParisTech; Paris France
    Elise Gay, Laboratoire Procédés et Ingénièrie en Mécanique et Matériaux, Unité mixte CNRS/Arts et Métiers ParisTech; -
    Michel Boustie, Département Physique et Mécanique des Matériaux, Institut Pprime (CNRS); -
    Michel Arrigoni, Laboratoire Brestois de Mécanique et des Systèmes ; -
    Presented at ICALEO 2012

    This paper presents the study of the behavior of carbon fiber reinforced polymer composit...

    $28.00

  • ICALEO 2012 Paper #407 (Latest Results in Laser Cutting of Carbon Fiber Reinforced Plastics)

    Latest Results in Laser Cutting of Carbon Fiber Reinforced Plastics
    Authors:
    Stephan Ziermann, TRUMPF Inc.; Plymouth Township MI USA
    Nicolai Speker, TRUMPF Laser- und Systemtechnik GmbH; Ditzingen Germany
    David Havrilla, TRUMPF Inc.; Plymouth MI USA
    Christian Koerber, TRUMPF GmbH+Co. KG; Ditzingen Germany
    Presented at ICALEO 2012

    Laser cutting of metallic materials is a well known and understood laser process that is prevalent in many industries. However, some industries like aerospace and automotive are looking more and more into utilizing fiber reinforced plastics in their production due to their high potential of lightweight construction and design. Car...

    $28.00

  • ICALEO 2012 Paper #406 (Advantages and Challenges of CFRP Laser Machining with ns-Pulses)

    Advantages and Challenges of CFRP Laser Machining with ns-Pulses
    Authors:
    Hagen Dittmar, Laser Zentrum Hannover e.V.; Hannover Germany
    Sven Bluemel, Laser Zentrum Hannover e.V.; Hannover Germany
    Peter Jaeschke, Laser Zentrum Hannover e.V.; Hannover
    Uwe Stute, Laser Zentrum Hannover e.V.; Hannover
    Dietmar Kracht, Laser Zentrum Hannover e.V.; Hannover
    Presented at ICALEO 2012

    Laser processing of CFRP is gaining a significant importance in industries relying on
    lightweight materials due to its high grade of automatability and precise machining.
    The use of pulsed lasers (pw) instead of continuous wave lasers (cw) for ablation,
    cutting, an...

    $28.00

  • ICALEO 2012 Paper #405 (Through Thickness Laser Joining of Continuous Glass Fiber Fabric Reinforcement)

    Through Thickness Laser Joining of Continuous Glass Fiber Fabric Reinforcement
    Authors:
    Shan-Ting Hsu, Columbia Univ. - JUST PRESENTER; -
    Huade Tan, Manufacturing Research Laboratory, Department of Mechanical Engineering, Columbia Univ.; New York NY USA
    Gen Satoh, Manufacturing Research Laboratory, Department of Mechanical Engineering, Columbia Univ.; New York NY USA
    Y. Lawrence Yao, Manufacturing Research Laboratory, Department of Mechanical Engineering, Columbia Univ.; New York NY USA
    Presented at ICALEO 2012

    Interlaminar crack initiation and propagation is a major failure mode in structural composite applications. Manufacturing induced fiber discontin...

    $28.00

  • ICALEO 2012 Paper #404 ( Influence of Different Ambient Media on the Laser Ablation Process of CFRP)

    Influence of Different Ambient Media on the Laser Ablation Process of CFRP
    Authors:
    Christian Freitag, Graduate School of Advanced Manufacturing Engineering GSaME, Univ. of Stuttgart; Stuttgart Germany
    Volkher Onuseit, Institut für Strahlwerkzeuge IFSW, Univ. of Stuttgart; Stuttgart Germany
    Rudolf Weber, Institut für Strahlwerkzeuge IFSW, Univ. of Stuttgart; Stuttgart Germany
    Thomas Graf, Institut für Strahlwerkzeuge IFSW, Univ. of Stuttgart; Stuttgart Germany
    Presented at ICALEO 2012

    Although laser processing of carbon reinforced plastics (CFRP) has gained large attention in the past few years, a large number of open questions concerning the basic ...

    $28.00

Pages

There is currently no content classified with this term.