PICALO 2008 Paper #M1101 (Laser Fabrication of Nanoparticles and Crystals in Solution (Invited Paper))
Laser Fabrication of Nanoparticles and Crystals in Solution (Invited Paper)
Authors:
Hiroshi Masuhara, Osaka University; Chuo-Ku, Kobe Japan
Teruki Sugiyama, Hamano Foundation, Center for Advanced Science and Innovation ; Osaka Japan
Hiroki Takeuchi, Osaka University ; Osaka Japan
Tsuyoshi Asahi, Osaka University ; Osaka Japan
Hiroshi Yoshikawa, Osaka University ; Osaka Japan
Yoichiroh Hosokawa, Osaka University ; Osaka Japan
Presented at PICALO 2008
Focusing femtosecnd lasser pulse or intense CW YAG laser, we have suceeded in fabricating small nanoparticles, and organic and protein crystals. Under such intense laser irradiation, ...$28.00
PICALO 2008 Paper #M105 (Direct Measurement of Temperature Distribution in Silicon by Ultrashort Laser Pulses)
Direct Measurement of Temperature Distribution in Silicon by Ultrashort Laser Pulses
Authors:
Hong Yu Zheng, Singapore Institute of Manufacturing Technology; Singapore Singapore
Y.C. Lam, Nanyang University ; Singapore Singapore
Presented at PICALO 2008
Femtosecond (fs) laser has been demonstrated as a high precision micromachining tool for materials processing because of its advantages of reduced thermal damage to the concerned substrate compared to long-pulsed lasers. It is often believed that most of the absorbed laser energy is carried away by the ablated material, leaving negligible amounts of thermal energy dissipated into the bulk of the remaining material. In contrast, pr...$28.00
PICALO 2008 Paper #M102 (Processing of Polymer and Organic Materials using Tunable Ultrafast Mid-Infrared Lasers (Invited Paper))
Processing of Polymer and Organic Materials using Tunable Ultrafast Mid-Infrared Lasers (Invited Paper)
Authors:
Richard Haglund, Vanderbilt University; Nashville TN USA
Nicole Dygert, Vanderbilt University ; Nashville TN USA
Stephen Johnson, Vanderbilt University ; Nashville TN USA
Kenneth Schriver, Vanderbilt University ; Nashville TN USA
Hee Park, Appliflex Llc; Mountain View CA USA
Presented at PICALO 2008
The principal vibrational modes of many polymers and organic materials of interest for electronic and electro-optic applications lie in the mid-infrared region of the spectrum between 2 and 10 µm. Most of these bands are shown in Figu...$28.00
PICALO 2008 Paper #M101 (Fundamental Issues Concerning Material Removal by Laser Irradiation of Insulating Materials (Invited Paper))
Fundamental Issues Concerning Material Removal by Laser Irradiation of Insulating Materials (Invited Paper)
Authors:
Tom Dickinson, Washington State University; Pullman WA USA
Presented at PICALO 2008
Laser materials interactions underlie a multitude of applications ranging from surface modification and structure formation, machining and cutting, and the formation of atom/molecule/ion sources for thin film growth (pulsed laser deposition). For several years we have been investigating the laser-induced emission mechanisms from materials at fluences below the threshold for optical breakdown in transparent wide bandgap materials. Under these conditions, very gentle, single atomic layer manipulat...$28.00
PICALO 2008 Paper #M1003 (Laser-assisted Hot Embossing of Microstructures)
Laser-assisted Hot Embossing of Microstructures
Authors:
Jens Holtkamp, Fraunhofer Institute for Laser Technology; Aachen Germany
Arnold Gillner, Fraunhofer Institute for Laser Technology; Aachen Germany
Presented at PICALO 2008
Conventional technologies for the manufacturing of micro-structured components with geometries below 100µm are injection moulding and hot embossing. Both technologies are mainly limited to polymer materials and require long cycle times since the whole forming tool has to be heated. These drawbacks can be eliminated by a newly developed laser assisted hot embossing technology, where high energy density laser radiation is used for a selective and fast heatin...$28.00
PICALO 2008 Paper #M1002 (Practical Issues in Laser Micro/Nano Machining)
Practical Issues in Laser Micro/Nano Machining
Authors:
Wenwu Zhang, GE Global Research; Schenectady NY USA
Jeffrey Shaw, GE Global Research; Schenectady NY USA
Brian Farrell, GE Global Research; Schenectady NY USA
Presented at PICALO 2008
Laser has become an important tool for micro/nano machining. To enable the successful application of laser micro/nano machining in manufacturing, requirements on geometry, speed and quality have to be fulfilled. In this paper, we review several representative applications of laser micro/nano machining, and discuss ways of solving the practical issues simultaneously.$28.00
PICALO 2008 Paper #M1001 (Manufacturing of Shaped Holes in Multi-Layer Plates by Laser Drilling)
Manufacturing of Shaped Holes in Multi-Layer Plates by Laser Drilling
Authors:
Kurt Walther, Lehrstuhl fuer Lasertechnik, RWTH; Aachen Germany
Jens Dietrich, Lehrstuhl fuer Lasertechnik, RWTH; Aachen Germany
Martin Hermans, Lehrstuhl fuer Lasertechnik, RWTH; Aachen Germany
Martin Witty, Lehrstuhl fuer Lasertechnik, RWTH; Aachen Germany
Mihael Brajdic, Lehrstuhl fuer Lasertechnik, RWTH; Aachen Germany
Alexander Horn, Lehrstuhl fuer Lasertechnik, RWTH; Aachen Germany
Ingomar Kelbassa, Lehrstuhl fuer Lasertechnik, RWTH; Aachen Germany
Reinhart Poprawe, Lehrstuhl fuer Lasertechnik, RWTH; Aachen Germany
Presented at PI...$28.00
PICALO 2008 Paper #908 (Process Control in Laser Materials Processing - Combined Sensor Technologies for Secure Quality Assurance)
Process Control in Laser Materials Processing - Combined Sensor Technologies for Secure Quality Assurance
Authors:
Markus Kogel-Hollacher, Precitec Optronik GmbH; Rodgau Germany
Jgen Mler-Borhanian, Precitec Kg; Gaggenau Germany
Christoph Dietz, Precitec Optronik Gmhb; Rodgau Germany
Thomas Nicolay, Precitec Optronik Gmhb; Rodgau Germany
Axel Kattwinkel, Precitec Optronik Gmhb; Rodgau Germany
Martin Halschka, Precitec Vision Gmhb & Co; Neftenbach Germany
Presented at PICALO 2008
The use of photo-diode sensors to in-line monitor a laser welding process is well known and state of the art. In the latter past the first camera ba...$28.00
PICALO 2008 Paper #907 (Advances in Laser-Deposition Equipment and Capabilities)
Advances in Laser-Deposition Equipment and Capabilities
Authors:
Richard Grylls, Optomec; Albuquerque NM USA
James Bullen, Optomec; Albuquerque NM USA
David Keicher, Optomec; Albuquerque NM USA
Presented at PICALO 2008
Laser Deposition techniques are gaining wider acceptance within manufacturing industries for both repair and rapid manufacture of metal components. The Laser Engineered Net Shaping (LENS®) process is one of the leading techniques in this field. Multiple LENS systems are now employed at DoD and other facilities, repairing a variety of high-performance components. In this role, LENS can be employed to shorten overhaul cycle times, and in some cases ex...$28.00
PICALO 2008 Paper #906 (Process Control on Laser Cladding by Coaxial Vision for Direct Manufacturing of 3D Metallic Structures)
Process Control on Laser Cladding by Coaxial Vision for Direct Manufacturing of 3D Metallic Structures
Authors:
Mehdi Guiraud, Gip Gerailp; Arcueil France
Pascal Aubry, Gip Gerailp; Arcueil France
Thierry Malot, Gerailp; Cedex France
Kevin Verdier, Gerailp; Cedex France
Presented at PICALO 2008
This article presents investigations carried out on the generation of metallic 3D structures. In order to generate 3D complex structures in laser cladding, it is important to control the deposition process. In this article, we present our new results on the process control design and implementation for direct manufactu...$28.00
Pages
There is currently no content classified with this term.