ICALEO 2013 Paper #1907 (Study of Carbon-Fiber-Reinforced-Polymer Under Moderate Laser Intensity. Application to Laser Drilling.)
Study of Carbon-Fiber-Reinforced-Polymer Under Moderate Laser Intensity. Application to Laser Drilling.
Authors:
Frederic Coste , Cnrs/Pimm; Paris France
Frederic Vales, Cnrs/Pimm; Paris France
Laurent Berthe, CNRS - Arts et Metiers/Lab PIMM; Paris France
Presented at ICALEO 2013
Carbon-fiber-reinforced polymers are increasingly used especially in structural parts for new aircraft. However, laser machining is not well implemented for cutting or drilling because significant collaterals effects remain. In this paper, we propose a study of laser-matter interaction at moderate flows (<1MW/cm2) of T700 CFRP. The dynamics of the process is observed by high speed camera (200...$28.00
ICALEO 2013 Paper #1908 (Optimization of Laser Parameters for Structural Bonding of CFRP Components with Paste Adhesive)
Optimization of Laser Parameters for Structural Bonding of CFRP Components with Paste Adhesive
Authors:
Deniz Ozel, Turkish Aerospace Industries, Inc.; Ankara Turkey
Lale Sacan, Turkish Aerospace Industries, Inc.; Ankara
Basak Basarir, Turkish Aerospace Industries, Inc.; Ankara
Ayhan Kilic, Turkish Aerospace Industries, Inc.; Ankara
Aysun Dogangun Akin, Turkish Aerospace Industries, Inc.; Ankara
Presented at ICALEO 2013
Carbon fiber reinforced polymer composites (CFRPs) are finding increasing usage in many industrial sectors, including aerospace industry. Adhesive bonding is often the most attractive joining technique for these materia...$28.00
ICALEO 2013 Paper #1909 (The Damage Characteristics and Mechanism of Cfrp during Laser Joining of Cfrp/Mild Steel Dissimilar Joint)
The Damage Characteristics and Mechanism of Cfrp during Laser Joining of Cfrp/Mild Steel Dissimilar Joint
Authors:
Xianghu Tan, Tsinghua University; Beijing Peoples Republic of China
Zhang Jing, General Motors(China) Investment Company Limited; Shanghai Peoples Republic of China
Shan Jiguo, Tsinghua University; Beijing Peoples Republic of China
Shanglu Yang, General Motors(China) Investment Company Limited; Shanghai Peoples Republic of China
Ren Jialie, Tsinghua University; Beijing Peoples Republic of China
Presented at ICALEO 2013
The reliable joining of carbon fiber reinforced polymer (CFRP) and metal is the key problem to its widespread ...$28.00
ICALEO 2013 Paper #2001 (Laser Cladding Using Scanning Optics - Effect of the Powder Feeding Angle and Gas Flow on Process Stability)
Laser Cladding Using Scanning Optics - Effect of the Powder Feeding Angle and Gas Flow on Process Stability
Authors:
Joonas Pekkarinen, Lappeenranta University of Technology; Turku Finland
Antti Salminen, Lappeenranta University of Technology; Lappeenranta Finland
Veli Kujanpaaa, Vtt Technical Research Centre of Finland; Lappeenranta Finland
Jarmo Ilonen, Lappeenranta University of Technology, Machine Vision and Pattern Recognition Laboratory (MVPR); Lappeenranta Finland
Lasse Lensu, Lappeenranta University of Technology, Machine Vision and Pattern Recognition Laboratory (MVPR); Lappeenranta Finland
Heikki Kalviainen, Lappeenranta University of Te...$28.00
ICALEO 2013 Paper #2002 (Microstructure Control During Laser Deposition of Nickel-Based Superalloy Ds Rene80)
Microstructure Control During Laser Deposition of Nickel-Based Superalloy Ds Rene80
Authors:
Heng Zhao, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
Dongyun Zhang, Beijing University of Technology; BeiJing USA
Zhibo Li, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
Xuanyang Cao, Institute of Laser Engineering, Beijing University of Technonogy; Beijing Peoples Republic of China
Tiechuan Zuo, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
Presented at ICALEO 2013
Rene 80 is a nickel-bas...$28.00
ICALEO 2013 Paper #2006 (The Effect of Minor Alloying Elements of Alloy 625 on the Laser Cladding Process)
The Effect of Minor Alloying Elements of Alloy 625 on the Laser Cladding Process
Authors:
Jonne Nakki, Tampere University of Technology; Kokkola Finland
Henri Pajukoski, Tampere University of Technology; Tampere Finland
Jari Tuominen, Tampere University of Technology; Tampere Finland
Petri Vuoristo, Tampere University of Technology; Tampere Finland
Presented at ICALEO 2013
Hot cracking sensitivity of some commercially available alloy 625 powders in laser cladding has been studied. Based on the previous studies on total of 11 powders from different manufacturers, some follow-up tests with powders that had varying amounts of additional alloying or impurity e...$28.00
ICALEO 2013 Paper #2008 (System Identification and Height Control of Laser Cladding Using Adaptive Neuro-Fuzzy Inference Systems)
System Identification and Height Control of Laser Cladding Using Adaptive Neuro-Fuzzy Inference Systems
Authors:
Mohammad Farshidianfar, University of Waterloo; Waterloo USA
Amir Khajepour, University of Waterloo; Waterloo ON Canada
Meysar Zeinali, University of Laurentian; Sudbury ON Canada
Adrian Gerlich, University of Waterloo; Waterloo ON Canada
Presented at ICALEO 2013
Laser cladding is an emerging technology which has recently received a significant attention by researchers due to its promising manufacturing features. A complicated object can be fabricated directly from a CAD model by means of a layer-by-layer manufacturing using this technique. In m...$28.00
ICALEO 2013 Paper #2009 (Microstructure of Mcraly Coatings on Steel Substrates)
Microstructure of Mcraly Coatings on Steel Substrates
Authors:
Armando Yanez, Universidade da Coruna; Ferrol Spain
Jose M. Amado, Universidade Da CoruñA; Ferrol Spain
Vicente Amigo, Universidad PolitéCnica De Valencia; Valencia Spain
MaríA J. Tobar, Universidade Da CoruñA; Ferrol Spain
Javier N. Montero, Universidade Da CoruñA; Ferrol Spain
Presented at ICALEO 2013
MCrAlY alloys (where M stands for Ni,Co or both) are commonly used as overlay protective coatings in gas turbine engine components against high temperature oxidation and corrosion. The protective effect of these alloys is due to the formation of a continuous thermally stable ox...$28.00
ICALEO 2013 Paper #201 (Cutting of Stainless Steel, Low Carbon Steel and Aluminum with Ultra-High Brightness 2 kW Direct Diode Laser)
Cutting of Stainless Steel, Low Carbon Steel and Aluminum with Ultra-High Brightness 2 kW Direct Diode Laser
Authors:
Jay Liebowitz, TeraDiode, Inc.; Littleton MA USA
Narasimhan Sreenivassan, Teradiode Inc; Wilmington MA USA
Michael Deutsch, Teradiode Inc.; Wilmington MA USA
Bien Chann, Teradiode Inc; Wilmington MA USA
Parviz Tayebati, Teradiode Inc.; Wilmington MA USA
James Burgess, Teradiode Inc.; Wilmington MA USA
Chris Haskell, Teradiode Inc.; Wilmington MA USA
Presented at ICALEO 2013
TeraDiode presents results of metal cutting with its 970 nm Wavelength Beam Combined (WBC) fiber-coupled, high brightness direct d...$28.00
ICALEO 2013 Paper #204 (Lasers with Line Focus Geometries As Universal Tool for a Wide Range of Surface Processing Applications)
Lasers with Line Focus Geometries As Universal Tool for a Wide Range of Surface Processing Applications
Authors:
Jens Meinschien, LIMO Lissotschenko Mikrooptik GmbH; Dortmund USA
Lutz Aschke, Limo Lissotschenko Mikrooptik Gmbh; Dortmund
Mikhail Ivanenko, Limo Lissotschenko Mikrooptik Gmbh; Dortmund
Presented at ICALEO 2013
The herewith presented approaches are relevant for a large range of applications were surfaces or thin films are treated by scanning processes in large scale, e.g. photovoltaics, flat panel displays production, drying and annealing surfaces. Such laser systems can be implemented into inline-processes, and efficiently replace in some technologies ...$28.00