Exciting News—A New LIA Website Is Coming Soon!

Get ready for a fresh design, enhanced usability, and improved accessibility. Click here for a sneak peek!

  • ICALEO 2009 Paper #M705 (Micropatterning and Characterization of Electrospun PCL/Gelatin Nanofiber Tissue Scaffolds by Femtosecond Laser Ablation)

    Micropatterning and Characterization of Electrospun PCL/Gelatin Nanofiber Tissue Scaffolds by Femtosecond Laser Ablation
    Authors:
    Yong Chae Lim, Ohio State University; Columbus OH USA
    Jed Johnson, Ohio State University; Columbus OH USA
    Zhengzheng Fei, Ohio State University; Columbus, OH USA
    Dave Farson, The Ohio State University; Columbus OH USA
    John J. Lannutti, Ohio State University; Columbus OH USA
    Hae Woon Choi, KeiMyoung University; Daegu South Korea
    L. James Lee, Ohio State University; Columbus OH USA
    Presented at ICALEO 2009

    PCL/gelatin is a biodegradable polymer blend with good biocompatibility, mechanical, p...

    $28.00

  • ICALEO 2009 Paper #M703 (Laser Assisted Manufacturing of Microscale Chemical Device of tt Reactor)

    Laser Assisted Manufacturing of Microscale Chemical Device of tt Reactor
    Authors:
    Marika Hirvimaki, Lappeenranta University of Technology, Laser Processing Research Group (Laboratory of Welding Technology and Laser Processing), Lappeenranta, Finland; Lappeenranta Finland
    Heidi Piili, Lappeenranta University of Technology, Laser Processing Research Group (Laborato; Lappeenranta Finland
    Matti Manninen, Lappeenranta University of Technology; Lappeenranta Finland
    Eero Kolehmainen, Lappeenranta University of Technology, Laboratory of Product and Process Development, Lut Chemistry, Faculty of Technology, Lappeenranta, Finland; Lappeenranta Finland
    Antti Salminen, Lap...

    $28.00

  • ICALEO 2009 Paper #M702 (Fabrication of High-resolution Conducting Pattern on Polyvinylidene Fluoride Substrates by KrF Excimer Laser)

    Fabrication of High-resolution Conducting Pattern on Polyvinylidene Fluoride Substrates by KrF Excimer Laser
    Authors:
    Ying Liu, Beijng University of Technology; Beijing China Peoples Republic of China
    Yijian Jiang, Beijing University of Technology; Beijing China Peoples Republic of China
    Presented at ICALEO 2009

    This paper describes using KrF excimer laser for fabricating conducting graph on Polyvinylidene fluoride (PVDF) substrates. Any graph is machined by direct laser writing technique. Furthermore, the defect structure is prepared on this patterned surface where laser etching is carried out. Mask patterning is used to select the conducting area when the patterned sample is irra...

    $28.00

  • ICALEO 2009 Paper #M701 (Rapid Prototyping Process Based on the Use of an Intelligent Pinhole Mask and 193 nm Excimer Laser Used to Fabricate Polymer Microfluidic Devices)

    Rapid Prototyping Process Based on the Use of an Intelligent Pinhole Mask and 193 nm Excimer Laser Used to Fabricate Polymer Microfluidic Devices
    Authors:
    Kevin Conlisk, National Centre for Laser Applications, National Univ. of Ireland; Galway Ireland
    Richard Sherlock, National Centre for Laser Applications, National Univ. of Ireland; Galway Ireland
    Gerard M. O'Connor, National Centre for Laser Applications, National Univ. of Ireland; Galway Ireland
    Thomas J. Glynn, National Centre for Laser Applications, National Univ. of Ireland; Galway Ireland
    Presented at ICALEO 2009

    Laser use for rapid prototyping of microfluidic devices has proven useful but can have...

    $28.00

  • ICALEO 2009 Paper #M604 (Effect of Grain Size on the Laser Machinability of Alumina)

    Effect of Grain Size on the Laser Machinability of Alumina
    Authors:
    Michael Furlan, Queen\'S University; Kingston ON Canada
    Gene Zak, Queen\'S University; Kingston ON Canada
    Presented at ICALEO 2009

    The effect of grain size on the laser machinability of alumina (Al2O3) was examined in order to meet the demand of higher tolerances when laser machining advanced ceramics. Laser lines created in alumina samples fabricated by using progressively increasing sintering times showed a difference in the amount of damage produced along the edges of the channels that were created, with less damage in smaller-grained samples. The average line width of the samples decreased with increasing grai...

    $28.00

  • ICALEO 2009 Paper #M603 (Influence of Polarization Plane on Groove Shape in Scribing of Sapphire by THG:YAG Laser)

    Influence of Polarization Plane on Groove Shape in Scribing of Sapphire by THG:YAG Laser
    Authors:
    Yasuhiro Okamoto, Okayama University; Okayama Japan
    Tomokazu Sakagawa, Kataoka Corporation; Yokohama Japan
    Yoshiyuki Uno, Okayama University; Okayama Japan
    Yutaka Mukoya, Okayama University; Okayama Japan
    Yuki Okamura, Okayama University; Okayama Japan
    Presented at ICALEO 2009

    Scribing characteristics of mono-crystalline sapphire by using THG:YAG laser of 355nm in wavelength were investigated. The influence of polarization plane of laser beam on the curved shape at the tip of groove was also discussed. Moreover, the reflection of laser beam was ex...

    $28.00

  • ICALEO 2009 Paper #M602 (A Comparison of Cut Path Deviation with Continuous and Pulsed Beam Modes in Diode Laser Chip-free Cutting of Glass)

    A Comparison of Cut Path Deviation with Continuous and Pulsed Beam Modes in Diode Laser Chip-free Cutting of Glass
    Authors:
    Salman Nisar, The University of Manchester; Manchester Great Britain
    Lin Li, The University of Manchester; Manchester Great Britain
    M.A. Sheikh, The University of Manchester; Manchester Great Britain
    Andrew J Pinkerton, The University of Manchester; Manchester Great Britain
    Presented at ICALEO 2009

    During laser cleaving of brittle materials with the controlled fracture technique, thermal stresses are generated. These induce the crack to form and extend it along the cutting path, which subsequently causes material separation. The fract...

    $28.00

  • ICALEO 2009 Paper #M601 (Zirconia Ceramic Dental Restorations: Laser Machining and Optical Testing (Invited Presentation, 40 minutes))

    Zirconia Ceramic Dental Restorations: Laser Machining and Optical Testing (Invited Presentation, 40 minutes)
    Authors:
    Duncan Hand, Heriot-Watt University; Edinburgh Great Britain
    Jonathan P. Parry, Heriot-Watt University; Edinburgh
    Mateusz Matysiak, Heriot-Watt University; Edinburgh
    Fraser C. Dear, Heriot-Watt University; Edinburgh
    J. Graham Crowder, Heriot-Watt University; Edinburgh
    Jonathan D. Shephard, Heriot-Watt University; Edinburgh
    Nick Weston, Dental Products Divisions; Gloucestershire
    Nick Jones, Dental Products Divisions; Gloucestershire
    Presented at ICALEO 2009

    Zirconia ceramic, or more ...

    $28.00

  • ICALEO 2009 Paper #M506 (High Energy Ultrafast Fiber Laser Systems and Their Application to High Quality Medical Device Processing)

    High Energy Ultrafast Fiber Laser Systems and Their Application to High Quality Medical Device Processing
    Authors:
    Michael Mielke, Raydiance, Inc.; Petaluma CA USA
    David Gaudiosi, Raydiance, Inc; Petaluma CA USA
    Carolyn Martinez, Raydiance, Inc; Petaluma CA USA
    Arzu Ozkan, Raydiance, Inc; Petaluma CA USA
    Kyungbum Kim, Raydiance, Inc; Petaluma CA USA
    Michael Greenburg, Raydiance, Inc; Petaluma CA USA
    Sean Peng, Raydiance, Inc; Petaluma CA USA
    Xinhua Gu, Raydiance, Inc; Petaluma CA USA
    Robert Cline, Raydiance, Inc; Petaluma CA USA
    Steve Sapers, Raydiance, Inc; Petaluma CA USA
    Presented at I...

    $28.00

  • ICALEO 2009 Paper #M505 (Laser-Assisted Processing of 3D Bioceramic Structures)

    Laser-Assisted Processing of 3D Bioceramic Structures
    Authors:
    Rafael Comesana, Universidade De Vigo; Vigo Spain
    Fernando Lusquinos, Universidade De Vigo; Vigo Spain
    Jesus del Val, Universidade De Vigo; Vigo Spain
    Thierry Malot, Erdt/Stamp; Paris France
    Antonio Riveiro, Universidade De Vigo; Vigo Spain
    Felix Quintero, Universidade De Vigo; Vigo Spain
    Mohamed Boutinguiza, Universidade De Vigo; Vigo Spain
    Pascal Aubry, Den/Dpc/Scp/Lilm; Gif-Sur-Yvette France
    Juan Pou, Universidade De Vigo; Vigo Spain
    Presented at ICALEO 2009

    The first case of bone disease treatment by means of a calcium phospha...

    $28.00

Pages

There is currently no content classified with this term.