ICALEO 2012 Paper #405 (Through Thickness Laser Joining of Continuous Glass Fiber Fabric Reinforcement)
Through Thickness Laser Joining of Continuous Glass Fiber Fabric Reinforcement
Authors:
Shan-Ting Hsu, Columbia Univ. - JUST PRESENTER; -
Huade Tan, Manufacturing Research Laboratory, Department of Mechanical Engineering, Columbia Univ.; New York NY USA
Gen Satoh, Manufacturing Research Laboratory, Department of Mechanical Engineering, Columbia Univ.; New York NY USA
Y. Lawrence Yao, Manufacturing Research Laboratory, Department of Mechanical Engineering, Columbia Univ.; New York NY USA
Presented at ICALEO 2012
Interlaminar crack initiation and propagation is a major failure mode in structural composite applications. Manufacturing induced fiber discontin...$28.00
ICALEO 2012 Paper #404 ( Influence of Different Ambient Media on the Laser Ablation Process of CFRP)
Influence of Different Ambient Media on the Laser Ablation Process of CFRP
Authors:
Christian Freitag, Graduate School of Advanced Manufacturing Engineering GSaME, Univ. of Stuttgart; Stuttgart Germany
Volkher Onuseit, Institut für Strahlwerkzeuge IFSW, Univ. of Stuttgart; Stuttgart Germany
Rudolf Weber, Institut für Strahlwerkzeuge IFSW, Univ. of Stuttgart; Stuttgart Germany
Thomas Graf, Institut für Strahlwerkzeuge IFSW, Univ. of Stuttgart; Stuttgart Germany
Presented at ICALEO 2012
Although laser processing of carbon reinforced plastics (CFRP) has gained large attention in the past few years, a large number of open questions concerning the basic ...$28.00
ICALEO 2012 Paper #403 (Experimental and Numerical Analysis of Laser Beam Transmission in Continuous Fiber Thermoplastic Composites)
Experimental and Numerical Analysis of Laser Beam Transmission in Continuous Fiber Thermoplastic Composites
Authors:
Mylène Deléglise, PRES Lille Nord de France, Mines Douai, DTPCIM; -
Benoît Cosson, PRES Lille Nord de France, Mines Douai, DTPCIM; -
Wolfgang Knapp, CLFA Fraunhofer ILT, c/o MINES ParisTech; Paris France
Presented at ICALEO 2012
Laser transmission welding has been demonstrated as being a suitable alternative to assemble continuous fiber thermoplastics composites. The knowledge and simulation of the mechanical properties obtained allow forecasting the mechanical strength of the final assembly. However, to estimate the required laser power and beam...$28.00
ICALEO 2012 Paper #402 (Laser-Based Hot-Melt Bonding of CFRP and GFRP - A Novel Joining Technology for Multi-Material-Design)
Laser-Based Hot-Melt Bonding of CFRP and GFRP - A Novel Joining Technology for Multi-Material-Design
Authors:
Philipp Amend, Bayerisches Laserzentrum GmbH; Erlangen Germany
Thomas Frick, Bayerisches Laserzentrum GmbH, Erlangen Graduate School in Advanced Optical Technologies (SAOT), Friedrich-Alexander Univ. Erlangen-Nürnberg; Erlangen Germany
Michael Schmidt, Bayerisches Laserzentrum GmbH, Erlangen Graduate School in Advanced Optical Technologies (SAOT), Chair of Photonic Technologies, Friedrich-Alexander Univ. Erlangen-Nürnberg; Erlangen Germany
Presented at ICALEO 2012
Due to increasing ecological awareness, lightweight design became a focus in the past few years....$28.00
ICALEO 2012 Paper #401 (Remote Processing of Tailored Fiber Reinforced Lightweight Structures)
Remote Processing of Tailored Fiber Reinforced Lightweight Structures
Authors:
Annett Klotzbach, Fraunhofer IWS Dresden; Dresden Germany
Andreas Fürst, Fraunhofer IWS Dresden, Technische Univ. Dresden; Dresden
Jan Hauptmann, Fraunhofer IWS Dresden; -
Eckhard Beyer, Fraunhofer IWS Dresden, Technische Univ. Dresden; Dresden
Presented at ICALEO 2012
Fiber-reinforced polymers are applied more and more in the aircraft industry, as well as the automobile industry. The possibility for spheric variation of structure properties by the adaptation of fiber layers and fiber orientation within the material enables a wide range of applications. Newly developed TF...$28.00
ICALEO 2012 Paper #305 (3D Analysis of the Powder Flow of Laser Cladding Nozzles)
3D Analysis of the Powder Flow of Laser Cladding Nozzles
Authors:
Rezak Mezari, STAMP-Arts et Métiers ParisTech; Paris France
Pascal Aubry, STAMP-Arts et Métiers ParisTech; Paris France
Thierry Malot, STAMP-Arts et Métiers ParisTech; Paris France
Kevin Verdier, STAMP-Arts et Métiers ParisTech; Paris France
Presented at ICALEO 2012
In order to generate 3D complex structures by laser metal deposition, especially for Direct Manufacturing of parts where the number of deposited layers can be high, it is necessary to control the width and the height of the deposited material. If a process control is needed to ensure the stability of the process, it is very i...$28.00
ICALEO 2012 Paper #304 (A Verified Model of Transient and Residual Stresses in Laser Direct Metal Deposition)
A Verified Model of Transient and Residual Stresses in Laser Direct Metal Deposition
Authors:
Michael Vogel, Manufacturing and Management Group, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester; M Great Britain
Mushtaq Khan, Manufacturing and Management Group, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester; Manchester
Andrew J. Pinkerton, Manufacturing and Management Group, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester; Manchester Great Britain
Juansethi Ibarra-Medina, Manufacturing and Management Group, School of Mechanical, Aerospace and Civil Engineering, The U...$28.00
ICALEO 2012 Paper #302 (Residual Stress Control in DMD Process)
Residual Stress Control in DMD Process
Authors:
Hyung Min Chae, NSF Center for Lasers and Plasmas in Advanced Manufacturing, Department of Mechanical Engineering, The Univ. of Michigan; Ann Arbor MI USA
Jyoti Mazumder, NSF Center for Lasers and Plasmas in Advanced Manufacturing, Department of Mechanical Engineering, Department of Materials Science and Engineering, The Univ. of Michigan; Ann Arbor MI
Presented at ICALEO 2012
The material fabricated by the Laser aided Direct Metal Deposition (DMD) process experiences extreme cyclic thermal loads during the process, which builds relatively high residual stress. The residual stress is directly related to fracture and fatigue behavior...$28.00
ICALEO 2012 Paper #301 (Laser-Assisted Development of New Ti-Mo-Zr Alloys for Biomedical Applications)
Laser-Assisted Development of New Ti-Mo-Zr Alloys for Biomedical Applications
Authors:
Carole Loable, Instituto Superior Tecnico, Dep. Chemical Engineering and ICEMS-Institute of Materials and Surface Science and Engineering, Technical Univ. of Lisbon; Lisbon Portugal
Amelia Almeida, Instituto Superior Tecnico, Dep. Chemical Engineering and ICEMS-Institute of Materials and Surface Science and Engineering, Technical Univ. of Lisbon; Lisbon Portugal
Rui Vilar, Instituto Superior Tecnico, Dep. Chemical Engineering and ICEMS-Institute of Materials and Surface Science and Engineering, Technical Univ. of Lisbon; Lisbon Portugal
Presented at ICALEO 2012
Laser manufacturing me...$28.00
ICALEO 2012 Paper #204 (Simulation of the Laser Drilling Process with the Constraint Natural Element Method)
Simulation of the Laser Drilling Process with the Constraint Natural Element Method
Authors:
Jeremie Girardot, PIMM Laboratory (CNRS), Arts et Metiers ParisTech; Paris France
L. Illoul, PIMM Laboratory (CNRS), Arts et Metiers ParisTech; Paris France
Philippe Lorong, PIMM Laboratory (CNRS), Arts et Metiers ParisTech; Paris France
Nicolas Ranc, PIMM Laboratory (CNRS), Arts et Metiers ParisTech; Paris France
Matthieu Schneider, PIMM Laboratory (CNRS), Arts et Metiers ParisTech; Paris France
Laurent Berthe, PIMM Laboratory (CNRS), Arts et Metiers ParisTech; Paris France
Veronique Favier, PIMM Laboratory (CNRS), Arts et Metiers ParisTech; P...$28.00
Pages
There is currently no content classified with this term.